quality assurance - Bon-Ton

Technical Design Approval
Requirements & Procedures
1

FIT SAMPLE APPROVAL PROCEDURE
Vendor Responsibilities
1. First fit samples must be received in Milwaukee no later than 10 business days after
receipt of fit sample request.
2. If required, 2 nd fit sample is due in Milwaukee within 10 business days follow vendor
receipt of fit comments
3. Refer to current version of the Bon-Ton “How to Measure Manual” and follow
instructions to ensure proper measurements.
4. Bon-Ton approved trim suppliers must be used. Alternate trim suppliers may be
suggested for consideration provided samples are sent to BV for testing and approved by
QA.
5. Fit samples should be reflective of the anticipated product. Samples should not be sent if:
(1) it is in incorrect fabric
(2) it does not meet the styling/construction provided in the tech pack
(3) it does not meet spec
(4) must reflect all corrections requested by Technical Design
(5) it is not our sample size
(6) it does not follow applicable children’s safety guidelines.
6. Every sample must have a Bon-Ton Sample Tag attached under the left armhole or the
left side seam, with all required information completed.
7. A Bon-Ton sample measurement sheet from our PLM must accompany each fit sample
with the vendor’s measurements noted on the sheet and include any comments or
concerns.
8. Meeting samples intended to double as 1 st fit samples need to follow the aforementioned
requirements. If it fails on any of these points, the meeting sample may not be used.
9. Actionable pre-production samples must be received in Milwaukee no later than 15
business days prior to knitting (full fashion sweaters) or cutting bulk fabric.
10. All actionable pre-production samples must be submitted with correct labeling, hang tags,
fabric, trim, packaging etc.
11. It is unacceptable for vendors to go into production without first submitting an actionable
pre-production sample that is approved by Bon-Ton Technical Design.
12. Bulk production must conform to the approved pre-production sample.
13. An actionable pre-production sample must be submitted for all carry-over programs.
This should be done on the fit time line.
14. Vendor is responsible for grading all zipper lengths except for:
(1) fly lengths
(2) openings on bottoms
(3) full length zippers on tops
Bon-Ton TD will partner with vendor to obtain correct grading.
15. Vendor is responsible for grading of embroidery. Bon-Ton Product Manager will provide
placement on sample size only. Vendor should submit suggested grading to Product
Manager.
2

Technical Design Responsibilities
1. Bon-Ton Technical Design will communicate directly with the agent/vendor.
2. Upon receipt of the first fit sample, Bon-Ton Technical Design will evaluate and send fit
reports to the appropriate agent/vendor within 6 business days (including the day of
receipt).
3. Upon receipt of the second fit sample, Bon-Ton Technical Design will evaluate and send
fit reports to the agent/vendor within 4 business days (including the day of receipt).
4. Actionable pre-production samples, Bon-Ton Technical Design will evaluate and send fit
comments to the agent/vendor within 3 business days (including the day of receipt).
5. For Fast Fashion samples, Bon-Ton Technical Designer will evaluate and send fit
comments with 2 business days (including the day of receipt).
6. Bon-Ton Technical Designer is authorized to make changes to fit, specifications, grading,
and garment construction as needed.
7. Fit and actionable pre-production samples must be sent to the appropriate Bon-Ton
Technical Designer, not the Product Manager, (See TD Contact Listing).
8. The Bon-Ton Technical Designer may request a pattern tracing/electronic pattern to be
sent along with the fit or actionable pre-production sample.
9. The Bon-Ton Technical Designer may request TOP sample - only send upon request
10. Fit schedule will be published to vendor upon request.
11. Review schedule to ensure earliest fit date & faster completion of production.
Product Manager Responsibilities
1. Establish a style in PLM
2. Responsible for providing design sketches and product detail for tech packs.
3. Responsible for sending original & all revised development packages to vendor.
4. Bon-Ton Product Manager is responsible for approving fabric, trims, styling, and
artwork.
5. Advertising samples are to be directed to the respective Bon-Ton Product Manager.
6. Request additional samples that are outside of the defined TD process.
3

A. SAMPLE TAG
* Attach sample card under left arm and / or left waist seam
310 W. Wisconsin Ave. Milwaukee, WI 53203 * Sample card must be completely filled out by vendor.
Style #: Size:
SAMPLE MADE IN: (MARK APPLICABLE)
Dept./Brands: Season: Closest Available Fabric/Trim
Description: Actual Fabric, Closest Avail Color
Agent: Vendor: Production Fabric & Trim
Production Factory: Vendor#: Production Color
Production Factory#: X Factory Date:
Country of Origin:
Contact/MR:
Product Manager:
Bon-Ton Tech Designer:
In DC Date: Comments:
Original Ad Sample
Meeting Sample Other
Fit Sample 1st 2nd 3rd
Actionable Pre-Production Sample
Top of Production Sample
Sample Color:
Shell Fabric Content:
Trim Fabric Content:
Lining Fabric Content:
Weight: Yarn Size:
Construction: Gauge:
FC/ELC:
Date sent:
Sample Tag * Attached to the item. Note any differences in the item.
4

B. QA Contact List
Quality Assurance
Bill Grange 414-347-5297 Divisional Vice President - Quality Assurance Bill.Grange@bonton.com
STR Inspections
Laura Whelan 414-347-5251 x3694 Quality Inspections Coordinator [Laura.Whelan@STRQuality.com]
Bureau Veritas Testing
Kevin Clancy 414-347-5251 Testing Coordinator Kevin.Clancy@us.bureauveritas.com
Main Phone Number 414-347-1152 + X
Color Laboratory
Meredith O'Day-
Shortt x3732 Color Technician Meredith.O'Day-Shortt@bonton.com
Amalia Recio X3697 Color Technician Amalia.Recio@bonton.com
CAD
Nicola Nielsen x3220 CAD- Manager Nicola.Nielsen@bonton.com
Tim Peterson x3691 Graphic Designer Tim.Peterson@bonton.com
Jaclyn
Ghazazadeh X5107 Assistant CAD Designer Jaclyn.Ghazazadeh@bonton.com
Technical Design
Marilyn Brown x3371 TD Manager
Technical Designer - Relativity Casual & Career Knits &
Marilyn.Brown@bonton.com
Brigitte O'Hara x3652 Sweaters; Woven Pants
Technical Designer - Studio Works Sweaters & Relativity
Brigitte.O'Hara@bonton.com
Carron Pace x3653 Casual & Career Woven except Pants Carron.Pace@bonton.com
Kim Loehner x3647 Technical Designer - Laura Ashley & Victor Kimberly.Loehner@bonton.com
Lisa Wierzbinski X6773 Assistant TD – Exertek, Relativity Intimates & Men’s Lounge
Assistant TD – Intimate Essentials, Zoë & Bella, Mambo
Lisa.Wierzbinski@bonton.com
Tara See x5352 Juniors & Chanteuse Tara.See@bonton.com
Julie Ye x3696 Technical Designer - Breckenridge & Studio Works Knits
Technical Designer - Consensus, Paradise Collection,
Julie.Ye@bonton.com
Colleen Bly x3648 Kenneth Roberts, Ruff Hewn, Vic & Men's Furnishings
Technical Designer - Ruff Hewn Kids; Mambo Kids & Young
Colleen.Bly@bonton.com
Amanda Ergen X5215 Men’s
Technical Designer – Miss Attitude (girls 7-16); Little Miss
Attitude (girls 12M-6x), Cuddle Bear (NB/Infant); Sleepwear;
Amanda.Ergen@bonton.com
Lara Quick x3651 Replenishment & Outerwear Men's and Women's Lara.Quick@bonton.com
Andrea Sanderlin 646-539-5790 Design Director - Men’s, Ladies & Kids Andrea@ruffhewn.com
Brenda Knight-
Henry 646-539-5791 Technical Designer - Ruff Hewn – Missy & Plus Brenda@ruffhewn.com
Sample Shipping Address
Bon-Ton Corp Address: Ruff Hewn Address:
Bon-Ton Stores, Inc. Ruff Hewn
310 W. Wisconsin Ave. 530 7 th Ave
10th floor West Suite #1107
Milwaukee, Wisconsin 53203 NY, NY 10018
5

Buttons
QUALITY ASSURANCE
APPROVED SUPPLIER LIST
USA EMSIG Manufacturing Corp. Hong Kong EMSIG (Far East) Ltd.
253 West 35 th Street Crystal Town Limited
New York, NY 10001 Unit 3-6, 3/F, Block A
Phone: 212-563-5460 Focal Industrial Centre
Fax: 212-971-0413 21 Man Lok Street
Contact: David Kursted Hunghom
E-mail: kurstedd@emsig.com Kowloon, Hong Kong
Contact: Deric Ma
Phone: 852-774-5880
Fax: 852-362-5760
E-mail: emsig@crystaltown.com.hk
USA R-PAC International Corp. Hong Kong R-PAC Hong Kong Ltd.
397 Hill Road Units 802-804 Laford Centre
Bowling Green, KY 42103 8383 Lai Chi Kok Road
Phone: 270-793-0806 Kowloon, Hong Kong
Fax: 270-783-0808 Contact: Nelson Chan
Contact: Byron Smith Phone: 852-2148-4869
E-mail: byron.smith@r-pac.com Fax: 852-2743-2499
E-mail: nelsonc@r-pac.com
USA LION BUTTON Asia LION BUTTON (Asia) Co. Ltd.
246 West 38 th Street Rm. 309, Hewlett Ctr.
New York, NY 10018 52-54 Hoi Yuen Road
Phone: 212-768-7090 ext. 21 Kwun Tong, Kowloon, Hong Kong
Fax: 212-768-7095 Phone: 852-2345 2666
Contact: Douglas Platt Fax: 852-2345 2623
E-mail: dplatt@lionbutton.com Contact: Willie W.K. Au
E-mail: lionasia@netvigator.com
USA Sher Plastics India Jindal Poly Buttons Ltd.
470 Seventh Ave 10 th KM Stone
New York, NY 10018 Delhi Road, Hisar - 125044
Phone: 212-760-9660 Haryana India
Fax: Phone: 91-1662-220366
Contact: Marlana Arnio Fax: 91-1662 220933
E-mail: M a r l a n a A @ s h e r p l a s t i c s . c o m Email: info@jindalbuttons.com
www.sherplastics.com
USA LAMCOM, INC. Hong Kong LAMCOM (HK), LTD.
153 West 36 th Street, 4/F Unit 8-9 / FL,
New York, NY 10018 Park Fook Industrial Building
Phone: 212-868-6910 No. 615 – 617 Tai Nan West Street
Fax: 212-868-4050 Cheung Sha Wan
Contact: Sam Wong Kowloon, Hong Kong
E-mail: sam@Lamcominc.com Phone: 852-2332-8393
Contact: F.Y. Wong Fax: 852-2332-7955
E-mail: fy@Lamcominc.com Contact: Kit Wong
Lamcom1@aol.com E-mail: kitwong722@163.com
Contact: Mr. Hui
E-mail: lamcom@biznetvigator.com
6

Buttons, cont.
Elastic
Interlining
China Samuel (Chin Yuan) Ltd
North River Industrial Zone,
Shijiao Town, Qingyuan City,
Guangdong Province, China
Phone: (86-763)-3728198
Fax: (86-763)-3729911
Contact: Mr. Cheung
Email: Lamcom_cheung@163.com
lamcomgz@pub.guangzhou.gd.cn
USA State Narrow Fabrics Inc. Guatemala DISTRIBUIDORA DE ENTRETELAS
2902 BORDEN AVENUE, P O Box 1389 S.A. 26 AVENIDA,
LONG ISLAND CITY N.Y. 11101-1389 7-27 ZONA 4 MIXCO COLONIA EL NARANJO
Phone: 718-392-8787 Ext. 235 BODEGA NO.6 ZONA FRANCA,
Fax: 718-392-9421 SADINSA AMERICA GUAT. 502-24360608
Contact: Ronald Levine, ext. 235 Contact: Daniel Lupitou
E-mail: Ron.levine@statenarrow.com Phone: 843-774-2727
www.StateNarrow.com & www.Klear-Stretch.com
USA Freudenberg & Vilene Int’l Ltd. Hong Kong (Kowloon) Freudenberg
8121 Grove St 8/FL Loyal Center
Sunland, CA 91040 828 Cheung Sha Wan Rd.
Phone: 818-352-9941 Phone: 852-2786-8368
Fax: 818-352-9941 Fax: 852-2786-2847
Contact: Muriel Martinez Contact: Andy Ho
E-mail: muriel.martinez@freudenberg-nw.com E-mail: andy.ho@fvihk.com
www.vilene.com
USA Precision Custom Coatings Hong Kong Precision Custom Coatings Asia
200 Maltese Drive 25/F, 9 Wing Hong Street
Totowa, NJ 07512 Cheung Sha Wan
Phone: 973-890-3873 Kowloon, Hong Kong
Fax: 973-890-9248 Phone: 852-2786-0090
Contact: Kristen LoPresti Fax: 852-2742-6965
E-mail: kristenl@pcc-usa.com Contact: Mr. Kenny Matsuura
E-mail: info@pccasia.com
kenny_m@pccasia.com
Mexico Precision Custom Coatings Guatemala Precision Custom Coatings
Calzada Acoxpa #436-ler. Plso c/o Entretelas, S.A.
Col. Ex Hacienda de Coapa Interior Zona Franca
Del. Coyoacan 14300 Parque Industrial Zeta La Union
Mexico, D.F. 09500 Km. 30.5 Carretera CA-9 Sur
Phone: 52-55-5-678-2310 Amatitlan, Guatemala
Fax: 52-55-5-678-2309 Phone: 502-633-8260
Contact: Mr. Conrado Ochando Fax: 502-633-18261
E-mail: cochando@ptec.com.mx Contact: Mr. Daniel Lupitou
E-mail: dlpcc@itelgua.com
7

Interlining, cont.
USA Ilshin America Inc. Hong Kong Ilshin Hong Kong
555 8 th Ave., Suite 1802 Room 1301, 13 th . Floor, Join-in Hang Sing Centre
New York, NY 10018 71-75 Container Port Road
Phone: 212-268-8223 Kwai Chung, N.T. Hong Kong
Fax: 212-760-6390 Phone: 852-2428-7511
Contact: Sonia Ha Fax: 852-2489-8849
E-mail: sonia.ha@isunicom.com Contact: Ricki Tsang
E-mail: rickitsang@isunicom.com
USA Kufner Textile Corporation
301 Halton Road
Suite G
Greenville, SC 29607
phone: +1 864 228 0749
fax: +1 864 228 6576
Contact: David Brancatelli
E-mail: dbrancatelli@kufner.com
www.kufner.com
USA Chargeurs Interlining/ Hong Kong Chargeurs Interlining (HK) Ltd.
Lainiere de Picardie, Inc 5 th Floor, Tungtex Building
835 Wheeler Way – Suite A 203 Wai Yip Street,
Langhorne, PA 19047 Kwun Tong, Kowloon Hong Kong
Contact: Joel Lim Contact: Ms. Oliver Sum
Phone: (212) 427-5283 (direct line) Phone: (852) 2942 3339
E-mail: JLIM@chargeurs-interlining.com Fax: (852) 2755 9873
Web: www.chargeurs-interlining.com E-mail: OSUM@chargeurs-interlining.com
Korea Lainiere de Picardie Korea Shanghai, China Chargeurs Interlining (Guangzhou) Ltd.
Sebang Building Room F, G, H, 17 Flr, North Gate Plaza
4 th Floor, 935-40 Bangbae-dong No. 99 West Tian Mu Road
Seocho-ku, 137060 Zha Bei District, Shanghai, China
Seoul, Korea Post Code: 200070
Contact: Mr. Kyung-Mo Kim Contacts: Ms. Wendy Yu
Phone: 82 – 2 584 7311 Phone: 86-21 5101 3240
Fax: 82 – 2 586 1367 Fax: 86 – 21 5101 3249
E-mail: KMKIM@chargeurs-interlining.com Email: WYU@chargeurs-interlining.com
Singapore Chargeurs Interlining Singapore Pte. Ltd.
No. 8 Pandan Crescent, UE Tech Park, #04-01
Singapore 128464
Contact: Mr. Peter Seah
Phone: 64 – 6873 6492
Fax: 64 – 6873 5570
E-mail: PSEAH@chargeurs-interlining.com
or peterseah.dhj@pacific.net.sg
Overall Hardware
USA Mississippi Trading, Inc. Hong Kong Mississippi Trading, Inc.
555 Lordship Boulevard Unit 6, 8/F CCT Telecom Bldg
Stratford, Ct. 06615 No. 11 Wo Shing Street
Phone: 203-919-6080 Fo Tan, Shatin, N.T. Hong Kong
Fax: 203-221-9225 Phone: 852-2690-0252
Contact: Stuart Gerson, Fax: 852-2690-2773
E-mail: mti@attglobal.net Contact: Jennifer Lee
E-mail: mtihk@netvigator.com
8

Overall Hardware cont.
USA Mississippi Trading, Inc.
307 W. 38 th St. Suite 203
New York, NY 10018
Phone: 212-947-4453 x11
Fax: 212-244-0756
Contact: Eric Kipperman
Eric.kipperman@verizon.net
www.mississippitrading.com
Snaps
Thread
USA Scovill Fasteners Hong Kong Scovill Hong Kong - Trade
1802 Scovill Drive 6/F Gemmy Factory Building
Clarkesville, GA 30523 12 Hung To Road
Phone: 888-353-0043 Kwun Tong Kowloon, Hong Kong
Contact: Kyle Burrell Phone: 852-3658-7700
E-mail: kburrell@scovill.com Contact: Ada Yeung
E-mail: aayeung@scovill.com
USA YKK Snap Fasteners America, Inc. Hong Kong YKK Hong Kong Ltd.
302 Factory Street, PO Box 240 14 th Floor,
Lawrenceburg, KY 40342 Tower 2, Silvercord,
Phone: 502-839-6971 30 Canton Rd, TSIMSHATSUI
Fax: 502-839-6525 Kowloon, Hong Kong
Contact: Daniel McIlwain Phone: (852) 2378 8300
E-mail: dmcilwain@ykksnap-america.com Fax: (852) 2375 6088
E-mail: sales@ykk.com.hk
USA Morito/Kane-M, Inc. Hong Kong Morito/Kane-M, Inc.
1 Madison Street, Suite F-9 Rm No. 1805, Tower 6,
East Rutherford, New Jersey 07073-1647 China Hong Kong City
Phone: 973-777-2797 33 Cantan Road, Tsimshatsui
Fax: 973-777-2739 Kowloon, Hong Kong
E-mail: sales@kane-m.com Phone: 852-2736 6212
E-mail: morito@morito.com.hk
USA American & Efird, Inc. Hong Kong American & Efird, Inc.
14205 Parkhill 15/F., Tsuen Wan Ind. Centre
Overland Park, Kansas 66221 220-248 Texaco Road
Phone: 913-851-8707 Tsuen Wan, N.T. Hong Kong
Cell913-221-9697 Phone: 852-2407-6595
Contact: Phillip Freese Fax: 852-2407-5433
E-mail: Phil.Freese@amefird.com E-mail: kelvincheuk@amefird.com.hk
Web: http://www.amefird.com/ mandyfung@amefird.com.hk
jennietsang@amefird.com.hk
rickycheung@amefird.com.hk
USA Coats World Wide Hong Kong Coats Hong Kong
Coats North American 19/F Millennium City
8127 Parsons Pass 378 Kwun Tong Road
New Albany, OH 43054 Kwun Tong, Kowloon
Phone: (614) 775-0661 Phone: 852-2796-6886
Mobile: (614) 456-9186 Fax:
Contact: Eduardo Pellegrini Contact: Fidilia Mang
Email: eduardo.pellegrini@coats.com E-mail: Fidilia.Mang@coats.com
www.coatssewingsolutions.com
9

Thread, cont.
USA Gutermann of America, Inc. Hong Kong Hung Tak Sewing and Pressing Equipment
33 Deer Run Road G/F., 59 King Fuk Street
Wilton, CT 06897 San Po Kong, Kowloon Hong Kong
Phone/Fax:(203) 761-7779 phone: (852) 2350 2628
Contact: Kathy Kierce fax: (852) 2350 3222
E-mail: Kathy.Kierce@gutermann.com Contact: Mrs. Choi Wing Hung Wing Hung
Zippers
Mexico Gutermann Polygal Mexicana,
SA de C.V. Calle 9 Este No. 86
Fracc. Industrial CIVAC
Jiutepec, Morelos C.P. 62500
phone: ( 777) 329-3700 Ext 3701
fax: (777) 319-1282
E-mail: wolfgang.schu@guetermann.com.mx
Contact: Mr. Wolfgang Schu
USA YKK Corporation of America Hong Kong YKK Hong Kong Ltd.
2700 Patriot Boulevard, Suite 180 14 th Floor,Tower 2,Silvercord
Glenview, IL, 60026 30 Canton Road T.S.T.
Contacts: Ajay Chandran Kowloon, Hong Kong
Phone: 847-657-9296 Phone: 852-2378-8300
Contact: Erin Burruss Fax: 852-2375-6088
Phone: 847-657-9298 Contact: Mr. Edmond Fung
E-mail: ajaychandran@ykk-usa.com E-mail: Edmond_fung@ykk.com.hk
erinburruss@ykk-usa.com
USA Ideal Fasteners Corp. Hong Kong Ideal Fastener Asia Ltd.
603 West Industry Drive IDEAL Centre
P O Box 548 320-322 Kwun Tong Rd.
Oxford, NC 27565 Kwun Tong, Kowloon, Hong Kong, China.
Contact: Phone: 852-2345-2049
Phone: (919) 693-3115 Fax: 852-2172-7298
Fax: (919) 693-3118
E-mail: tmatthews@idealfastener.com
USA Talon Hong Kong Talon International Inc
21900 Burbank Blvd. Unit 101, 1/F Sunbeam Centre
Suite 270 27 Shing Yip Street
Woodland Hills, CA 91367 Kwun Tong, Kowloon, Hong Kong
Phone: 818-444-4125 Phone: 852-3189-0639
Fax: 818-444-4110 Contact: Kathy Sit
Contact: Gary Dyne Email: Kathy@talonzippers.com.hk
E-mail: gdyne@talonzippers.com
USA Euro-A Zipper Hong Kong Euro-A Zipper Co.
OBO Zipper Co., Ltd RM 17-18, 6/F, TRANS ASIA CENTRE
1/F, 8729, 14 Ave No.18 KIN HONG STREET
Brooklyn, New York 11228 Kwan Chung, N.T., Hong Kong
Phone: 1-718-331-2855 Phone: 852 –2612- 0628
Fax: Fax: 852-2421-2082
Contact: Jackie Chan Contact: Polly Yew
Email: jackie.chan@euro-a-zipper.com E-mail: polly@euro-a-zipper.com
www.euro-a-zipper.com Contact: Fred Chan
Email: fred.chan@euro-a-zipper.com)
10

Zippers – cont.
USA Coats Opti China Coats Opti
23 Bannbury Lane Coats Industrial Park
Palm Coast, FL 32137 Fengtang Dadao, Tangwei Village
Phone: 386-447-2083 Fuyong Town, Baoan District
Contact: Hugo Rojas Shenzhen, China 518103
Email: hugo.rojas@coats.com Phone: 86-755-2734-2888
Fax: 86-755-2734-2688
India Coats Opti
7F, Jupiter 2A Block
Prestige Technology Park
Sarjapur-Marthahalli Ring Rd
Bangalore, Karnataka, 560 087 India
Phone: 91-080-41900441 Ext 441
Contact: S. K. Raja
Email: SK.Raja@coats.com
USA Tat Fai Zipper Company Limited Hong Kong Tat Fai Zipper Company Limited
P. O. Box 2151 Unit 310-312, 3/F
Chapel Hill, NC 27515 Kwai Cheong Centre
Phone: 919-932-1417 No. 40-52 Kwai Cheong Rd.
Fax: 919-967-8117 Kwai Chung, N. T., Hong Kong
Contact: John Parker Phone: (852) 3583 2018
Email: john@tat-zipper.com Fax: (852) 3583 1747
Contact: James Ong
Phone: (852) 3583 2608
Email: james@tat-zipper.com
Contact: Ricky Tang
Email: ricky@tat-zipper.com
Contact: Idoel Shue
Taiwan MAX Horng Dah Zippers Co., Ltd China MAX MAX ZIPPER (China) Co., Ltd
7F, No 196, Joutz St, Neihu Dist. No. 1, Huang Pu Jiang S.Rd,
Taipei 114, Taiwan Kunshan City, Jiangsu, China
Phone: 886-2-2627-1828 Phone: 86-512-5708-0001
Email: sales@maxzip.com.tw Email: salem@maxzip.cn
Contact: Nora Hung / Steven Huang Contact: Andy Wen / Bobo Kung
UK MAX-EURO Bangladesh MAX ZIPPER (BD)
77 Needham Drive, Cranage, Crewe, #6, Lake Circus, Kalabagan 3 rd Lane,
Cheshire, CW4 8FB UK Dhanmondi, Dhaka, Bangladesh
Phone: 44-7920-054-411 Phone: 880-2-9127-729
Email: max-euro@maxzip.com.tw max-bd@maxzip.com.tw
Contact: Bob Smeaton
Japan MAX JAPAN
14-9, 3-CHOME MUKONOSOU HON MACHI,
ANAGISAJU HYOGO, 661-0031 JAPAN
Phone: 81-6-6436-4821
Email: tamotsuyokoi@bridge.ocn.ne.jp
Contact: Tamotsu Yokoi
USA LAMCOM, INC. Hong Kong LAMCOM (HK), LTD.
153 West 36 th Street, 4/F Unit 8-9 / FL,
New York, NY 10018 Park Fook Industrial Building
Phone: 212-868-6910 No. 615 – 617 Tai Nan West Street
Fax: 212-868-4050 Cheung Sha Wan
Contact: Sam Wong Kowloon, Hong Kong
E-mail: sam@Lamcominc.com Phone: 852-2332-8393
Contact: F.Y. Wong Fax: 852-2332-7955
E-mail: fy@Lamcominc.com Contact: Kit Wong
Lamcom1@aol.com E-mail: kitwong722@163.com
11

Zippers – cont.
China Samuel (Chin Yuan) Ltd
North River Industrial Zone,
Shijiao Town, Qingyuan City,
Guangdong Province, China
Phone: (86-763)-3728198
Fax: (86-763)-3729911
Contact: Mr. Cheung
Email: Lamcom_cheung@163.com
lamcomgz@pub.guangzhou.gd.cn
Taiwan Wavecape Industrial Co., Ltd. (TWK Zipper)
No. 332, Sec. 4, Changsing Rd.
Lujhu Township, Taoyuan County 338, Taiwan
Phone: +886-3-3221822 (cell: 886-921-163607)
Fax: +886-3-3221830
Contact: Robert Shen, Sales Manager
Email:
12
Contact: Mr. Hui
E-mail: lamcom@biznetvigator.com