Double-Dry-nOn-cooled-Probe - Webshop, Gas Analysis Technology

More documents

Recommendations

Info

Unit Operation InstructionDDOP Probe2 PREFACEThis operating instruction is called a unit manual. The operating instruction covers only thisparticnular unit with respect to technical data, installation, use etc. This specific unit is apart of a complete system. Control and interaction in the specific system may varyaccording to system demands.The SDSP Probe is to be used with FLSmidth Airloq analysis system. The Probe comprises aflange, piping, Filter, connectors among others.The system interaction with the SDSP-Probe is described in the system manual. Thedocument overview is to be found in section 2.1.The whole analysis system is to be operated and maintained as described in the systemmanual. If not, the efficiency and lifetime of the system will be reduced. An alarm mustalways be corrected at once. Qualified and trained personnel must perform themaintenance.2.1 DOCUMENT MAPThis manual is to be considered as part of the complete system documentation. A completeset of system documentation for an FLSmidth Airloq A/S gas analysis system may comprise:• User manuals (Binder) (all project specific drawings, list etc.) includingo System datasheets covering project specific data.o System operation instructionso Unit operating instructions (this document among others)o Drawings, lists etc.• Data sheets (Binder)o Sub supplier’s manuals and datasheets2.2 DEFINITIONS AND TERMS2.2.1 GENERALSystem (analysis system)System manualSystem datasheetUnit manualGMUCUBETrained/qualified PersonnelThe complete analysis system which includes this unit amongothersThe manual covering system function and interaction with thisunitOverall system data where all technical data and units areidentifiedAn operating instruction for a specific unit (Part of completesystem. E.g. for a Probe)Gas Monitoring Unit: Cabinet or housing comprising analysisparts, power distribution and control.FLSmidth Airloq A/S analysis housing insulated, heated, cooledand with GMU installed.Indicates personnel that is not only certified to work on theplant according to all local and national regulations, butpersonnel who also has specific training from e.g. FLSmidthAirloq in use and maintenance of gas analysis systems.2.2.2 UNITS AND CONVERSION FACTORSAll units in FLSmidth Airloq documentation are SI-units except from:Drawing no: 53895-DDOP-450-20 Page 3 of 14
Unit Operation InstructionDDOP ProbePressure:Temperature:Bar°C (degrees Celsius)For general use the following approximations can be used for conversion:Length: mm to inch factor 0,04Pressure: Bar to PSI (US) factor 14,5Temperature: °C to °F °F = °C × 1.8 + 322.2.3 DDOP PROBEDDOPProbeBBFilterDouble-Dry-nOn-cOoled-ProbeExtracts sample gas from a specific point in process.Blow-back cleaning air for filter cleaning.Filters sample gas from dust particles to protect the system.2.3 HOW TO READ THIS MANUALRead the instructions in this manual carefully before installing the system.FLSmidth Airloq A/S cannot accept any liability for damages due to nonobservanceof this manual.Sign:Before doing anything to the system, read warnings in section 2.4.This manual must be used in conjunction with the appendix. The document map in section2.1 shows an overview of the complete gas analysis system. This document covers theSDSP Probe only. For e.g. electrical wiring, the reader must use the appendix “Circuitdiagram”. All issues related to system performance must be found in the system manual.No part of this manual may be reproduced or transmitted in any form or by any means,electronic or printed, without the prior written permission of FLSmidth Airloq A/S. If thismanual is translated, the English version is to be considered as the original one.2.4 WARNING2.4.1 WARNING – HAZARDOUS VOLTAGES!Sign:All electrical installations must be in accordance with national and local regulations, andqualified personnel who are aware of these regulations must perform the electricalinstallation.Voltage must not be applied to the system until all electrical connections have been madeand checked and then only by qualified personnel who are aware of the risks involved.Any disconnection of the earthed conductor inside or outside the device or the release of theearthed conductor connection can make the device hazardous to life. Deliberatedisconnection is inadmissible/prohibited.All connections must be made in accordance with the drawings in this manual.Drawing no: 53895-DDOP-450-20 Page 4 of 14
Page 1 and 2: Double-Dry-nOn-cooled-ProbeDDOPUSER
Page 3: Unit Operation InstructionDDOP Prob
Page 7 and 8: Unit Operation InstructionDDOP Prob
Page 15 and 16: Document List:Unit ManualRevision L
Page 17 and 18: 218W1-08326 635W1-04W1 W1-05 W1-063
Page 20 and 21: Part listGas Monitoring UnitPart ID
Page 22: Part listRecommended wear parts for

Double-Dry-nOn-cooled-Probe - Webshop, Gas Analysis Technology

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?