Robert Juliat Cyrano Manual - EES

TECHNICAL FILE2500W HMI FOLLOWSPOT1015 /B, BS, M & BSMSection B - 1MAINTENANCEDisconnect from the mains before any servicing.Service only by qualified technician.CONDENSER.- Disconnect from the mains.- Open the lamp house's bonnet.- Take out the lamp.( Refer to section A - 11 and proceed in reverse order).- Turn the fast lock 1 .- Withdraw the lens holder 2 .- Clean the lens 3 with a soft dry cloth.- Remount parts in reverse order.Robert Juliat reserve the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.- Clean in the same way, the 2 lenses found in the lens tube.MIRROR.- Disconnect from the mains.- Open the lamp house's bonnet.- Take out the lamp.( Refer to section A - 11 and proceed in reverse order).- Clean the mirror 4 with a soft dry cloth.- Remount parts in reverse order.SPARK-GAP.- Disconnect from the mains.- Open the lamp house bonnet.- Check the distance of the electrodes that should be 1mm.(If you notice a larger gap, then please contact the ROBERT JULIAT'stechnical department).service@robertjuliat.frrobert juliat Route de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr1 mm