Edbro Tipping Hoists Introduction LR.pdf - Transpec

ABOUT EDBRO 1-01EDBRO TIPPING HOISTSProvidinghydraulicsto the tipping industry since 1916Since developing the first hydraulic tipping gear in 1916, Edbrohas maintained it’s technological supremacy by continuous researchand development. Laser welding is the most recent advance inmanufacturing to be employed by Edbro. The Edbro range ofcylinders is the lightest and most durable range of telescopiccylinders in the world, providing a true “fit and forget” solutionto tipping applications.Edbro CylindersEdbro have extensive experience in the design and manufactureof cylinders, the CS series of cylinders includes a wide selectionof mounting options. Using the same basic cylinder technologyEdbro also offers a range of combined cylinder and tanks; the CXrange. The CX offers a neat and lightweight solution for rigidchassis. Edbro also offer a range of underbody cylinders withinformation available on request from Transpecs.QualityExtensive on-line quality control systems are employed throughoutthe manufacturing process to ensure a “fit and forget cylinder”is produced every time. Edbro cylinders are subjected to a finalproduction test at well above working pressure.Transport Specialties Ltd. Cnr Kerrs & Ash Roads, Wiri, PO Box 98-971, SAMC, Auckland, New Zealand. Phone: +64 09 980 7300 Fax: +64 09 980 7306Email: sales@transpecs.co.nz Web: www.transpecs.co.nz Transpecs Hydraulic Catalogue - Section 01 - Edbro Tipping Hoists Introduction - Updated 1/12/10