Fluid End Parts Manual - QUINCIE Oilfield Products

GARDNER DENVER ®301WPD997 Rev AAugust, 2005WELL SERVICING PUMPMODELOPI-600TRIPLEX PUMPFLUID ENDPARTS LISTECN 1027506

FLUID END PARTS LISTFOROPI-600WELL SERVICING PUMPMAINTAIN PUMP RELIABILITY AND PERFORMANCE WITHGENUINE GARDNER DENVERPARTS AND SUPPORT SERVICESGardner Denver ® genuine pump parts are manufactured to design tolerances and are developed foroptimum dependability. Design and material innovations are the result of years of experience withhundreds of different pump applications. Reliability in materials and quality assurance is incorporatedin our genuine replacement parts.Your authorized Gardner Denver Sales Office offers all the backup you ll need. The Fort WorthManufacturing Facility maintains a large inventory of genuine parts.Gardner Denver supports your needs with these services:1. Trained parts specialists to assist you in selecting the correct replacement parts.2. Repair and maintenance kits designed with the necessary parts to simplify servicing your pump.Authorized service technicians are factory trained and skilled in pump maintenance and repair. Theyare ready to respond and assist you by providing fast, expert maintenance and repair services.For the location of your local authorized Gardner Denver distributor, refer to the yellowpages of your phone directory or contact:Factory (Tulsa): Service Center (Odessa): Service Center (Ft. Worth):Gardner Denver Well Servicing Pumps4747 South 83 rd East AvenueTulsa, Oklahoma 74145Chaparral2121 West 44 th StreetOdessa, Tx 79768Geoquip7533 Kathy LaneFt. Worth, Texas 76126Phone: (918) 664-1151(800) 738-8099Phone: (432) 366-5433(800) 368-1134Phone: (817) 249-6400(800) 824-0271Fax: (918) 664-6225 Fax: (432) 363-9940 Fax: (817) 249-6401INSTRUCTIONS FOR ORDERING REPAIR PARTSWhen ordering parts, specify Pump MODEL and SERIAL NUMBER (see nameplate on unit). TheSerial Number is also stamped on top of the cylinder end of the frame (cradle area).All orders for Parts should be placed with the Tulsa or Ft. Worth facility.Where NOT specified, quantity of parts required per pump or unit is one (1); where more than oneis required per unit, quantity is indicated in parenthesis. SPECIFY EXACTLY THE NUMBER OFPARTS REQUIRED.301WPD997Page i

GARDNER DENVER PRODUCT WARRANTYGENERAL PROVISIONS ANDLIMITATIONSGardner Denver (the "Company") warrants to eachoriginal retail purchaser ("Purchaser") of its newproducts, assemblies or parts from the Company or itsauthorized distributors that such products are, at thetime of delivery to the Purchaser, made with goodmaterial and workmanship. No warranty is made withrespect to:1. Any product which has been repaired oraltered in such a way, in the Company'sjudgment, as to affect the product adversely.2. Any product which has, in the Company'sjudgment, been subject to negligence,accident, or improper storage, improperinstallation, operation or application.(Examples: over-pressure, sand-outs,cavitation, corrosion, erosion or degradation).3. Any product which has not been operated ormaintained in accordance with therecommendations of the Company.4. Components or accessories manufactured,warranted and serviced by others.Any reconditioned or prior owned product.Claims for items described in (4) above should besubmitted directly to the manufacturer.WARRANTY PERIODThe Company's obligation under this warranty islimited to repairing or, at its option, replacing, duringnormal business hours at an authorized service facilityof the Company, any part or assembly which in theCompany s judgment proved to have unsatisfactorymaterial or workmanship within the applicableWarranty Period as follows.Except for the products or components listed below,and subject to the limitations and restrictions set forthin the Disclaimer section set forth below, theWarranty Period for all products is 1,250 hours ofoperation or three (3) months after start-up, not toexceed 120 days after delivery to Purchaser,whichever occurs first. The exceptions are as follows:1. Power end is warranted for twelve (12) monthsfrom date of start-up or eighteen (18) monthsfrom date of delivery to the Purchaser,whichever occurs first.2. Forged steel fluid cylinders are warranted formaterials and workmanship for 6 months fromthe date of installation or 18 months from thedate of delivery to the purchaser, which everoccurs first.3. Repairs are warranted for 90 days from thedate of delivery, for the workmanship andmaterials of the new parts installed.4. Weld repaired fluid ends and weld repairedcomponents are not warranted.5. Expendable fluid end parts, including, but notlimited to, valves, valve parts, packing, linersand pistons, are not covered by this warrantydue to variable abrasive nature of materialpumped.PRESERVATION ASSEMBLIES DESTINEDFOR STORAGEIn order for warranty acceptance any pump assemblynot immediately installed or destined to be in storageor in transit for extended periods of time must beprepared for storage as defined in the Company sLong Term Storage Procedure. This includes but isnot limited to:Drain and thoroughly clean inside power endcrankcase.Spray rust inhibiting oil on all bearing, machinedand inside surfaces of the power end.Induce clean gear oil into any circulating pump,filter, heat exchanger and piping.Remove valves, seats and plungers from thefluid end. Thoroughly clean and dry these partsand all internal surfaces. Coat all cylinder bores,valve covers and reusable expendable parts withrust preventative.Flush all water, and contaminants from pump,tanks, hoses and spray nozzles. Spray allcomponents with a rust inhibiting oil.Rotate pump every 30 days to insure bearingsare oiled.At the expense of the Purchaser, any productproperly preserved must be inspected by anauthorized agent of the Company, prior to theCompany, granting any extended warrantybeyond that stated in this warranty.LABOR TRANSPORTATION ANDINSPECTIONThe Company will provide labor, by Companyrepresentative or authorized service personnel, forrepair or replacement of any product or part thereofwhich in the Company's judgment is proved not to be301WPD997Page ii

as warranted. Labor shall be limited to the amountspecified in the Company's labor rate schedule. Laborcosts in excess of the Company rate schedulescaused by, but not limited to, location or inaccessibilityof the equipment, or labor provided by unauthorizedservice personnel is not provided for by this warranty.All costs of transportation of product or parts claimednot to be as warranted and, of repaired or replacementparts to or from such service facility shall be borne bythe Purchaser. The Company may require the returnof any part claimed not to be as warranted to one of itsfacilities as designated by the Company, transportationprepaid by the Purchaser, to establish a claim underthis warranty.Replacement parts provided under the terms of thiswarranty are warranted for the remainder of theWarranty Period of the product upon which installed tothe same extent as if such parts were originalcomponents.The Company may request a root cause analysis beperformed in-order to identify if a request for warrantyclaim meets the requirements of this warranty.DISCLAIMERExcept as to title, the foregoing warranty is the soleand exclusive warranty of the Company. TheCompany hereby extends other manufactureswarranty or guaranties, if any given to Company bysuch manufacturer, but only to the extent theCompany is able to enforce such warranty orguaranties. The Company has not authorized anyparty to make any representation or warranty otherthan as expressly set forthherein. SELLER HEREBYDISCLAIMS AND EXCLUDES ANY OTHEREXPRESS, IMPLIED OR STATUTORYWARRANTIES, ARISING BY OPERATION OF LAWOR OTHERWISE, INCLUDING, WITHOUTLIMITATION, ANY WARRANTIES OFMERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. COMPANY MAKES NOWARRANTIES OR REPRESENTATIONS OF ANYKIND WHATSOEVER (EXPRESS, IMPLIED ORSTATUTORY), OF LAW OR OTHERWISE, ON ANYEQUIPMENT, COMPONENT PARTS ORACCESSORIES SOLD HEREUNDER WHICH, ARENOT MANUFACTURED BY COMPANY.NOTWITHSTANDING ANYTHING HEREIN TO THECONTRARY, THE FOREGOING WARRANTY SHALLBE THE SOLE AND EXCLUSIVE REMEDYAVAILABLE TO THE PURCHASER. UNDER NOCIRCUMSTANCES, WHETHER IN CONTRACT,TORT OR OTHERWISE, SHALL THE COMPANY STOTAL LIABILITY ARISING IN CONNECTION WITHANY PURCHASE ORDER EXCEED THE AMOUNTOF ANY SALES OR OTHER PROCEEDS RECEIVEDPURSUANT THERETO. IN ADDITION, UNDER NOCIRCUMSTANCES, WHETHER IN CONTRACT,TORT OR OTHERWISE, SHALL THE COMPANY BELIABLE FOR LIQUIDATED, SPECIAL, INDIRECT,INCIDENTAL, EXEMPLARY, OR CONSEQUENTIALDAMAGES, EXPENSES OR COSTS, INCLUDING,WITHOUT LIMITATION, LOST PROFITS ORFACILITY DOWNTIME, HOWEVER CAUSED ANDEVEN IF THE POTENTIAL OF SUCH DAMAGESWAS DISCLOSED AND/OR KNOWN.No statement, representation, agreement, orunderstanding, oral or written, made by any agent,distributor, representative, or employee of theCompany which is not contained in this Warranty willbe binding upon the Company unless made in writingand executed by an officer of the Company.This warranty shall not be effective as to any claimwhich is not presented within 30 days after the dateupon which the product is claimed not to have been aswarranted. Any action for breach of this warranty mustbe commenced within one year after the date uponwhich the cause of action occurred.Any adjustment made pursuant to this warranty shallnot be construed as an admission by the Companythat any product was not as warranted.WARRANTY REQUESTSProducts to be returned for warranty analysis shallbe approved for return in writing by the Company priorto shipment. All requests for product return shall besubmitted by email. Facsimile or letter to:Warranty Department c/oGardner Denver Petroleum Pumps4747 South 83 rd East AvenueTulsa, Oklahoma 74145Email: CCR.QAR@gardnerdenver.comFacsimile: (918) 664-6225301WPD997Page iii

TABLE OF CONTENTS2.25 FLUID CYLINDER ASSEMBLY ....................................................................................32.75 STANDARD FLUID CYLINDER ASSEMBLY ...............................................................53 STANDARD FLUID CYLINDER ASSEMBLY ....................................................................72.75 AUTOFRETTAGED FLUID CYLINDER ASSEMBLY....................................................93 AUTOFRETTAGED FLUID CYLINDER ASSEMBLY ......................................................113.5 FLUID CYLINDER ASSEMBLY ....................................................................................134 FLUID CYLINDER ASSEMBLY .......................................................................................154.5 FLUID CYLINDER ASSEMBLY ....................................................................................175 FLUID CYLINDER ASSEMBLY .......................................................................................19RUBBER SPRING LOADED PACKING ..............................................................................20CDI ADJUSTABLE HNBR PACKING ..................................................................................23CDI NON-ADJUSTABLE HNBR PACKING .........................................................................26DISCHARGE OPTIONS FOR STANDARD FLUID ENDS ...................................................29DISCHARGE OPTIONS FOR AUTOFRETTAGED FLUID ENDS .......................................35SUCTION MANIFOLD OPTIONS ........................................................................................38FLUID END SERVICE TOOLS ............................................................................................44VALVE SEAT PULLER KITS ...............................................................................................45301WPD997 Page 1

2.25 FLUID CYLINDER ASSEMBLY301WPD997 Page 2

2.25 FLUID CYLINDER ASSEMBLYRefNo. Name of Part Qty. Part No.1 Fluid Cylinder, 2.25 CWS 1 013PN002* Valve Assembly (Includes Items 2-6) 6 227QBX4822 Valve Seat (Suction and Discharge) 6 21164603 O-ring 6 21164704 Valve (Suction and Discharge) 6 21165605 Valve Spring (Suction and Discharge) 6 21164736 Cage - Valve Spring (Suction and Discharge) 6 21164717 Suction Valve Cover 3 086PN0108 O-ring 3 901SH05-3339 Back-up Ring (for Item 8) 6 25BC65010 Retainer Nut Suction Valve Cover 3 50PN0711 Discharge Valve Cover Plain 2 PP100594712 Retainer Nut Discharge Valve Cover Plain 2 50PN0713 O-ring 3 901SH05-33314 Back-up Ring (for Item 13) 6 25BC65015 Retainer Discharge Valve Cover 2 1502 Gage Connection 1 PP100600916 Discharge Valve Cover Gauge Connection 1 054PN00717 O-ring 1 10796718 Stuffing Box 2.25 3 200WPD01419 Seal Carrier Stuffing Box to Fluid End 3 491PN02720 O-ring 3 10797821 O-ring 3 10797322 Plunger 2.25 3 160PN01023 Plunger Clamp 3 171PN00824 Screw (Included in Item #23) 6 75P7725 Packing Group 3 See Pages 20-2826 Suction Manifold 1 See Pages 38-4327 Capscrew 12 655EE04028 Dowel Pin 3 62M2029 Discharge Flanges See Pages 29-3430 Stud 16 450VP003-03431 Hex Nut 1 50B3232 Seal 2 1502 Weco 1 901SH06-1*** Fluid End to Frame Bolts (NOT SHOWN) 12 200WPD655301WPD997 Page 3

2.75 STANDARD FLUID CYLINDER ASSEMBLY301WPD997 Page 4

2.75 STANDARD FLUID CYLINDER ASSEMBLYRefNo. Name of Part Qty. Part No.1 Fluid Cylinder, 2.75 Standard 1 11PN042 Valve Seat (Suction and Discharge) Mission 6 928SH01-8Valve Seat (Suction and Discharge) Novatech 6 1013763 Suction Valve Mission (No Burst Disk) 3 927SH01-7Suction Valve Novatech (No Burst Disk) 3 101914Suction Valve Mission with 22.5k Burst Disk 3 301WPD4824 Discharge Valve Mission 3 927SH01-7Discharge Valve Novatech 3 1019145 Valve Spring Suction 3 918VP0246 Valve Spring Discharge 3 918VP0247 Suction Spring Retainer Cage 3 131PN068 Suction Valve Stop 3 130PN099 Suction Valve Cover 3 302WPD14710 O-ring 3 10798111 Back-up Ring (for Item 10) 6 25BC65212 Retainer Nut Suction Valve Cover 3 50PN0613 Discharge Valve Cover Plain 2 300WPD14714 Retainer Nut Discharge Valve Cover Plain 2 50PN0715 O-ring 3 10797516 Back-up Ring (for Item 15) 6 25BC65117 O-ring 1 10796718 Plunger 2.75 3 202WPD03819 Packing Group 3 See Pages 20-2820 Plunger Clamp 3 170PN0421 Suction Manifold 1 See Pages 38-4322 Screw 12 655EE04023 Discharge Valve Cover Gauge Connection 1 301WPD14724 Retainer Discharge Valve Cover 2 1502 Gage Connection 1 054PN00725 Seal 2 1502 Weco 1 901SH06-126 Stuffing Box 2.75 3 202WPD01427 Stud 16 450VP003-03428 Hex Nut 16 50B3229 Discharge Flanges See Pages 29-3430 Seal Carrier Stuffing Box to Fluid End 3 491PN01631 O-ring 3 18535132 Seal 3 901SH13-733 Dowel Pin 3 62M2034 Screw (Included in Item #20) 6 75P77*** Fluid End to Frame Bolts (NOT SHOWN) 12 200WPD655301WPD997 Page 5

3 STANDARD FLUID CYLINDER ASSEMBLY301WPD997 Page 6

3 STANDARD FLUID CYLINDER ASSEMBLYRefNo. Name of Part Qty. Part No.1 Fluid Cylinder, 3 Standard 1 11PN042 Valve Seat (Suction and Discharge) Mission 6 928SH01-8Valve Seat (Suction and Discharge) Novatech 6 1013763 Suction Valve Mission (No Burst Disk) 3 927SH01-7Suction Valve Novatech (No Burst Disk) 3 101914Suction Valve Mission with Burst Disk 3 301WPD4824 Discharge Valve Mission 3 927SH01-7Discharge Valve Novatech 3 1019145 Valve Spring Suction 3 918VP0246 Valve Spring Discharge 3 918VP0247 Suction Spring Retainer Cage 3 131PN068 Suction Valve Stop 3 130PN099 Suction Valve Cover 3 302WPD14710 O-ring 3 10798111 Back-up Ring (for Item 10) 6 25BC65212 Retainer Nut Suction Valve Cover 3 50PN0613 Discharge Valve Cover Plain 2 300WPD14714 Retainer Nut Discharge Valve Cover Plain 2 50PN0715 O-ring 3 10797516 Back-up Ring (for Item 15) 6 25BC65117 O-ring 1 10796718 Plunger 3 3 201WPD03819 Packing Group 3 See Pages 20-2820 Plunger Clamp 3 170PN0421 Suction Manifold 1 See Pages 38-4322 Screw 12 655EE04023 Discharge Valve Cover Gauge Connection 1 301WPD14724 Retainer Discharge Valve Cover 2 1502 Gage Connection 1 054PN00725 Seal 2 1502 Weco 1 901SH06-126 Stuffing Box 3 3 204WPD01427 Stud 16 450VP003-03428 Hex Nut 16 50B3229 Discharge Flanges See Pages 29-3430 Seal Carrier Stuffing Box to Fluid End 3 491PN01631 O-ring 3 18535132 Seal 3 901SH13-733 Dowel Pin 3 62M2034 Screw 6 75P77*** Fluid End to Frame Bolts (NOT SHOWN) 12 200WPD655301WPD997 Page 7

2.75 AUTOFRETTAGED FLUID CYLINDER ASSEMBLY301WPD997 Page 8

2.75 AUTOFRETTAGED FLUID CYLINDER ASSEMBLYRefNo. Name of Part Qty. Part No.1 Fluid Cylinder, 2.75 Autofrettaged 1 303WPD0292 Valve Seat (Suction and Discharge) Mission 6 928SH01-8Valve Seat (Suction and Discharge) Novatech 6 1013763 Suction Valve Mission (No Burst Disk) 3 927SH01-7Suction Valve Novatech (No Burst Disk) 3 101914Suction Valve Mission with Burst Disk 3 301WPD4824 Discharge Valve Mission 3 927SH01-7Discharge Valve Novatech 3 1019145 Valve Spring Suction 3 918VP0246 Valve Spring Discharge 3 918VP0247 Suction Spring Retainer Cage 3 131PN068 Suction Valve Stop 3 130PN099 Suction Valve Cover 3 313WPD14710 O-ring 3 10798111 Back-up Ring (for Item 10) 6 25BC65212 Retainer Nut Suction Valve Cover 3 305WPD20513 Discharge Valve Cover Plain 2 314WPD14714 Retainer Nut Discharge Valve Cover Plain 2 303WPD20515 O-ring 3 10797516 Back-up Ring (for Item 15) 6 25BC65117 O-ring 1 10796718 Plunger 2.75 3 202WPD03819 Packing Group 3 See Pages 20-2820 Plunger Clamp 3 170PN0421 Suction Manifold 1 See Pages 38-4322 Screw 12 655EE04023 Discharge Valve Cover Gauge Connection 1 315WPD14724 Retainer Discharge Valve Cover 2 1502 Gage Connection 1 304WPD20525 Seal 2 1502 Weco 1 901SH06-126 Stuffing Box 2.75 3 202WPD01427 Seal Carrier Stuffing Box to Fluid End 3 491PN01628 O-ring 3 18535129 Seal 3 901SH13-730 Dowel Pin 3 62M2031 Screw 6 75P7732 Discharge Flanges See Pages 35-37* OPTIONAL ITEMS:33 Valve Cover Lock 3 PP100135734 Lock Bolt Left-hand Thread 3 PP1001506*** Fluid End to Frame Bolts (NOT SHOWN) 12 200WPD655301WPD997 Page 9

3 AUTOFRETTAGED FLUID CYLINDER ASSEMBLY301WPD997 Page 10

3 AUTOFRETTAGED FLUID CYLINDER ASSEMBLYRefNo. Name of Part Qty. Part No.1 Fluid Cylinder, 3 Autofrettaged 1 303WPD0292 Valve Seat (Suction and Discharge) Mission 6 928SH01-8Valve Seat (Suction and Discharge) Novatech 6 1013763 Suction Valve Mission (No Burst Disk) 3 927SH01-7Suction Valve Novatech (No Burst Disk) 3 101914Suction Valve Mission with Burst Disk 3 301WPD4824 Discharge Valve Mission 3 927SH01-7Discharge Valve Novatech 3 1019145 Valve Spring Suction 3 918VP0246 Valve Spring Discharge 3 918VP0247 Suction Spring Retainer Cage 3 131PN068 Suction Valve Stop 3 130PN099 Suction Valve Cover 3 313WPD14710 O-ring 3 10798111 Back-up Ring (for Item 10) 6 25BC65212 Retainer Nut Suction Valve Cover 3 305WPD20513 Discharge Valve Cover Plain 2 314WPD14714 Retainer Nut Discharge Valve Cover Plain 2 303WPD20515 O-ring 3 10797516 Back-up Ring (for Item 15) 6 25BC65117 O-ring 1 10796718 Plunger 3 3 201WPD03819 Packing Group 3 See Pages 20-2820 Plunger Clamp 3 170PN0421 Suction Manifold 1 See Pages 38-4322 Screw 12 655EE04023 Discharge Valve Cover Gauge Connection 1 315WPD14724 Retainer Discharge Valve Cover 2 1502 Gage Connection 1 304WPD20525 Seal 2 1502 Weco 1 901SH06-126 Stuffing Box 3 3 204WPD01427 Seal Carrier Stuffing Box to Fluid End 3 491PN01628 O-ring 3 18535129 Seal 3 901SH13-730 Dowel Pin 3 62M2031 Screw 6 75P7732 Discharge Flanges See Pages 35-37* OPTIONAL ITEMS:33 Valve Cover Lock 3 PP100135734 Lock Bolt Left-hand Thread 3 PP1001506*** Fluid End to Frame Bolts (NOT SHOWN) 12 200WPD655301WPD997 Page 11

3.5 FLUID CYLINDER ASSEMBLY301WPD997 Page 12

3.5 FLUID CYLINDER ASSEMBLYRefNo. Name of Part Qty. Part No.1 Fluid Cylinder, 3.5 1 11PN032 Valve Seat (Suction and Discharge) Mission 6 928SH01-4Valve Seat (Suction and Discharge) Novatech 6 1001993 Suction Valve Mission (No Burst Disk) 3 927VP010-003Suction Valve Novatech (No Burst Disk) 3 TUL101778Suction Valve Mission with 22.5k Burst Disk 3 302WPD4824 Discharge Valve Mission 3 927VP010-003Discharge Valve Novatech 3 TUL1017785 Valve Spring Suction 3 918VP0236 Valve Spring Discharge 3 918VP0237 Suction Spring Retainer Cage 3 131PN078 Suction Valve Stop 3 130PN089 Suction Valve Cover 3 305WPD14710 O-ring 3 10798511 Back-up Ring (for Item 10) 6 25BC65812 Retainer Nut Suction Valve Cover 3 50PN0813 Discharge Valve Cover Plain 2 303WPD14714 Retainer Nut Discharge Valve Cover Plain 2 50PN0615 O-ring 3 10798116 Back-up Ring (for Item 15) 6 25BC65217 O-ring 1 10796718 Plunger 3.5 3 203WPD03819 Packing Group 3 See Pages 20-2820 Plunger Clamp 3 170PN0321 Suction Manifold 1 See Pages 38-4322 Screw 12 655EF06023 Discharge Valve Cover Gauge Connection 1 304WPD14724 Retainer Discharge Valve Cover 2 1502 Gage Connection 1 054PN00925 Seal 2 1502 Weco 1 901SH06-126 Stuffing Box 3.5 3 206WPD01427 Stud 16 450VP003-03428 Hex Nut 16 50B3229 Discharge Flanges See Pages 29-3430 Seal Carrier Stuffing Box to Fluid End 3 491PN01731 O-ring 3 16281032 Seal 3 901SH13-233 Dowel Pin 3 62M2034 Screw 6 75P77*** Fluid End to Frame Bolts (NOT SHOWN) 12 200WPD655301WPD997 Page 13

4 FLUID CYLINDER ASSEMBLY301WPD997 Page 14

4 FLUID CYLINDER ASSEMBLYRefNo. Name of Part Qty. Part No.1 Fluid Cylinder, 4 1 11PN032 Valve Seat (Suction and Discharge) Mission 6 928SH01-4Valve Seat (Suction and Discharge) Novatech 6 1001993 Suction Valve Mission (No Burst Disk) 3 927VP010-003Suction Valve Novatech (No Burst Disk) 3 TUL101778Suction Valve Mission with Burst Disk 3 302WPD4824 Discharge Valve Mission 3 927VP010-003Discharge Valve Novatech 3 TUL1017785 Valve Spring Suction 3 918VP0236 Valve Spring Discharge 3 918VP0237 Suction Spring Retainer Cage 3 131PN078 Suction Valve Stop 3 130PN089 Suction Valve Cover 3 305WPD14710 O-ring 3 10798511 Back-up Ring (for Item 10) 6 25BC65812 Retainer Nut Suction Valve Cover 3 50PN0813 Discharge Valve Cover Plain 2 303WPD14714 Retainer Nut Discharge Valve Cover Plain 2 50PN0615 O-ring 3 10798116 Back-up Ring (for Item 15) 6 25BC65217 O-ring 1 10796718 Plunger 4 3 200WPD03819 Packing Group 3 See Pages 20-2820 Plunger Clamp 3 170PN0321 Suction Manifold 1 See Pages 38-4322 Screw 12 655EF06023 Discharge Valve Cover Gauge Connection 1 304WPD14724 Retainer Discharge Valve Cover 2 1502 Gage Connection 1 054PN00925 Seal 2 1502 Weco 1 901SH06-126 Stuffing Box 4 3 209WPD01427 Stud 16 450VP003-03428 Hex Nut 16 50B3229 Discharge Flanges See Pages 29-3430 Seal Carrier Stuffing Box to Fluid End 3 491PN01731 O-ring 3 16281032 Seal 3 901SH13-233 Dowel Pin 3 62M2034 Screw 6 75P77*** Fluid End to Frame Bolts (NOT SHOWN) 12 200WPD655301WPD997 Page 15

4.5 FLUID CYLINDER ASSEMBLY301WPD997 Page 16

4.5 FLUID CYLINDER ASSEMBLYRefNo. Name of Part Qty. Part No.1 Fluid Cylinder, 4.5 1 11PN022 Valve Seat (Suction and Discharge) Mission 6 928SH01-3Valve Seat (Suction and Discharge) Novatech 6 1014893 Suction Valve Mission (No Burst Disk) 3 927VP010-004Suction Valve Novatech (No Burst Disk) 3 101469Suction Valve Mission with 22.5k Burst Disk 3 PP10038324 Discharge Valve Mission 3 927VP010-004Discharge Valve Novatech 3 1014695 Valve Spring Suction 3 918PN066 Valve Spring Discharge 3 918PN067 Suction Spring Retainer Cage 3 131PN048 Suction Valve Stop 3 130PN069 Suction Valve Cover 3 307WPD14710 O-ring 3 10799011 Back-up Ring (for Item 10) 6 25BC66112 Retainer Nut Suction Valve Cover 3 50PN0513 Discharge Valve Cover Plain 2 306WPD14714 Retainer Nut Discharge Valve Cover Plain 2 50PN0415 O-ring 3 10798516 Back-up Ring (for Item 15) 6 25BC65817 Retainer Nut Discharge Valve Cover Gauge Connection 3 54PN0518 Plunger 4.5 3 204WPD03819 Packing Group 3 See Pages 20-2820 Plunger Clamp 1 170PN0321 Suction Manifold 12 See Pages 38-4322 Screw 1 655EF06023 Discharge Valve Cover Gauge Connection 1 72PN1024 Seal 2 1502 Weco 1 901SH06-125 Stuffing Box 4.5 3 211WPD01426 Stud 8 79AJ527 Hex Nut 16 50B3428 Discharge Flanges See Pages 29-3429 Seal Carrier Stuffing Box to Fluid End 3 491PN01830 O-ring 3 10799131 Seal 3 901SH13-532 Dowel Pin 3 62M2033 Screw 6 75P77*** Fluid End to Frame Bolts (NOT SHOWN) 12 200WPD655301WPD997 Page 17

5 FLUID CYLINDER ASSEMBLY301WPD997 Page 18

5 FLUID CYLINDER ASSEMBLYRefNo. Name of Part Qty. Part No.1 Fluid Cylinder, 5 1 11PN022 Valve Seat (Suction and Discharge) Mission 6 928SH01-3Valve Seat (Suction and Discharge) Novatech 6 1014893 Suction Valve Mission (No Burst Disk) 3 927VP010-004Suction Valve Novatech (No Burst Disk) 3 101469Suction Valve Mission with Burst Disk 3 PP10038324 Discharge Valve Mission 3 927VP010-004Discharge Valve Novatech 3 1014695 Valve Spring Suction 3 918PN066 Valve Spring Discharge 3 918PN067 Suction Spring Retainer Cage 3 131PN048 Suction Valve Stop 3 130PN069 Suction Valve Cover 3 307WPD14710 O-ring 3 10799011 Back-up Ring (for Item 10) 6 25BC66112 Retainer Nut Suction Valve Cover 3 50PN0513 Discharge Valve Cover Plain 2 306WPD14714 Retainer Nut Discharge Valve Cover Plain 2 50PN0415 O-ring 3 10798516 Back-up Ring (for Item 15) 6 25BC65817 Retainer Nut Discharge Valve Cover Gauge Connection 3 54PN0518 Plunger 5 3 205WPD03819 Packing Group 3 See Pages 20-2820 Plunger Clamp 3 170PN0321 Suction Manifold 1 See Pages 38-4322 Screw 12 655EF06023 Discharge Valve Cover Gauge Connection 1 72PN1024 Seal 2 1502 Weco 1 901SH06-125 Stuffing Box 5 3 213WPD01426 Stud 8 79AJ527 Hex Nut 8 50B3428 Discharge Flanges See Pages 29-3429 Seal Carrier Stuffing Box to Fluid End 3 491PN01830 O-ring 3 10799131 Seal 3 901SH13-532 Dowel Pin 3 62M2033 Screw 6 75P77*** Fluid End to Frame Bolts (NOT SHOWN) 12 200WPD655301WPD997 Page 19

RUBBER SPRING LOADED PACKING2.25 RSL PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 2.25 1 901VP014-0192 PRESSURE RING 2 901VP002-0193 SPACER 1 206WPD1444 FEMALE ADAPTER 1 203PN001-0155 WIPER SEAL 1 60AM506 O-RING 1 1378667 PACKING NUT 1 182PN0252.75 RSL PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 2.75 1 901VP014-0132 PRESSURE RING 2 901VP002-0133 SPACER 1 200WPD1444 FEMALE ADAPTER 1 203PN001-0095 WIPER SEAL 1 60AM826 O-RING 1 1378667 PACKING NUT 1 308WPD0083 RSL PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 3 1 901VP014-0022 PRESSURE RING 2 901VP002-0023 SPACER 1 201WPD1444 FEMALE ADAPTER 1 203PN001-0015 WIPER SEAL 1 5957100006 O-RING 1 1378667 PACKING NUT 1 309WPD008301WPD997 Page 20

RUBBER SPRING LOADED PACKING3.5 RSL PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 3.5 1 901VP014-0122 PRESSURE RING 2 901VP002-0123 SPACER 1 202WPD1444 FEMALE ADAPTER 1 203PN001-0075 WIPER SEAL 1 60AM836 O-RING 1 901SH05-2567 PACKING NUT 1 310WPD0084 RSL PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 4 1 901VP014-0052 PRESSURE RING 2 901VP002-0053 SPACER 1 203WPD1444 FEMALE ADAPTER 1 203PN001-0035 WIPER SEAL 1 60AM846 O-RING 1 901SH05-2567 PACKING NUT 1 311WPD0084.5 RSL PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 4.5 1 901VP014-0142 PRESSURE RING 2 901VP002-0143 SPACER 1 204WPD1444 FEMALE ADAPTER 1 203PN001-0055 WIPER SEAL 1 60AM736 O-RING 1 1085157 PACKING NUT 1 312WPD008301WPD997 Page 21

RUBBER SPRING LOADED PACKING5.0 RSL PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 5 1 901VP014-0092 PRESSURE RING 2 901VP002-0093 SPACER 1 205WPD1444 FEMALE ADAPTER 1 203PN001-0065 WIPER SEAL 1 60AM746 O-RING 1 1676617 PACKING NUT 1 313WPD008301WPD997 Page 22

CDI ADJUSTABLE HNBR PACKING2.25 CDI ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 2.25 1 300OPE2222 PRESSURE RING 1 307OPE2223 FEMALE ADAPTER 1 306OPE1704 SPACER 1 300OPE1445 WIPER SEAL 1 60AM816 JUNK RING 1 300OPE3177 PACKING NUT 1 300WPD0082.75 CDI ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 2.75 1 301OPE2222 PRESSURE RING 1 308OPE2223 FEMALE ADAPTER 1 307OPE1704 SPACER 1 301OPE1445 WIPER SEAL 1 60AM826 JUNK RING 1 301OPE3177 PACKING NUT 1 301WPD0083 CDI ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 3 1 5957020002 PRESSURE RING 1 5956940003 FEMALE ADAPTER 1 5956860004 SPACER 1 5957180005 WIPER SEAL 1 5957100006 JUNK RING 1 302OPE3177 PACKING NUT 1 302WPD008301WPD997 Page 23

CDI ADJUSTABLE HNBR PACKING3.5 CDI ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 3.5 1 302OPE2222 PRESSURE RING 1 309OPE2223 FEMALE ADAPTER 1 308OPE1704 SPACER 1 302OPE1445 WIPER SEAL 1 60AM836 JUNK RING 1 303OPE3177 PACKING NUT 1 303WPD0084 CDI ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 4 1 303OPE2222 PRESSURE RING 1 310OPE2223 FEMALE ADAPTER 1 309OPE1704 SPACER 1 303OPE1445 WIPER SEAL 1 60AM846 JUNK RING 1 305OPE3177 PACKING NUT 1 304WPD0084.5 CDI ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 4.5 1 5957040002 PRESSURE RING 1 5956960003 FEMALE ADAPTER 1 5956880004 SPACER 1 5957200005 WIPER SEAL 1 60AM736 JUNK RING 1 306OPE3177 PACKING NUT 1 305WPD008301WPD997 Page 24

CDI ADJUSTABLE HNBR PACKING5 CDI ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 5 1 5957050002 PRESSURE RING 1 5956970003 FEMALE ADAPTER 1 5956890004 SPACER 1 5957210005 WIPER SEAL 1 60AM746 JUNK RING 1 307OPE3177 PACKING NUT 1 306WPD008301WPD997 Page 25

CDI NON-ADJUSTABLE HNBR PACKING2.25 CDI NON-ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 2.25 1 300OPE2222 PRESSURE RING 1 307OPE2223 FEMALE ADAPTER 1 306OPE1704 SPACER 1 300OPE1445 WIPER SEAL 1 60AM816 JUNK RING 1 300WPD3177 PACKING NUT 1 307WPD0088 O-RING 1 1378662.75 CDI NON-ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 2.75 1 301OPE2222 PRESSURE RING 1 308OPE2223 FEMALE ADAPTER 1 307OPE1704 SPACER 1 301OPE1445 WIPER SEAL 1 60AM826 JUNK RING 1 301WPD3177 PACKING NUT 1 308WPD0088 O-RING 1 1378663 CDI NON-ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 3 1 5957020002 PRESSURE RING 1 5956940003 FEMALE ADAPTER 1 5956860004 SPACER 1 5957180005 WIPER SEAL 1 5957100006 JUNK RING 1 302WPD3177 PACKING NUT 1 309WPD0088 O-RING 1 137866301WPD997 Page 26

CDI NON-ADJUSTABLE HNBR PACKING3.5 CDI NON-ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 3.5 1 302OPE2222 PRESSURE RING 1 309OPE2223 FEMALE ADAPTER 1 308OPE1704 SPACER 1 302OPE1445 WIPER SEAL 1 60AM836 JUNK RING 1 303WPD3177 PACKING NUT 1 310WPD0088 O-RING 1 901SH05-2564 CDI NON-ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 4 1 303OPE2222 PRESSURE RING 1 310OPE2223 FEMALE ADAPTER 1 309OPE1704 SPACER 1 303OPE1445 WIPER SEAL 1 60AM846 JUNK RING 1 305WPD3177 PACKING NUT 1 311WPD0088 O-RING 1 901SH05-2564.5 CDI NON-ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 4.5 1 5957040002 PRESSURE RING 1 5956960003 FEMALE ADAPTER 1 5956880004 SPACER 1 5957200005 WIPER SEAL 1 60AM736 JUNK RING 1 306WPD3177 PACKING NUT 1 312WPD0088 O-RING 1 167661301WPD997 Page 27

CDI NON-ADJUSTABLE HNBR PACKING5 CDI NON-ADJUSTABLE HNBR PACKING ASSEMBLYRefNo. Name of Part Qty. Part No.1 HEADER RING, 5 1 5957050002 PRESSURE RING 1 5956970003 FEMALE ADAPTER 1 5956890004 SPACER 1 5957210005 WIPER SEAL 1 60AM746 JUNK RING 1 307WPD3177 PACKING NUT 1 313WPD0088 O-RING 1 167661301WPD997 Page 28

DISCHARGE OPTIONS FOR STANDARD FLUID ENDS2 1502 HAMMER UNION DISCHARGE FLANGESTANDARD FLUID ENDS2-1/4 TO 3 FLUID ENDSRefNo. Name of Part Qty. Part No.1 2 1502 Female Flange DNV Certified Material 1 267PN062 O-ring 1 1079703 Seal 2 1502 Weco 1 901SH06-13-1/2 TO 4 FLUID ENDSRefNo. Name of Part Qty. Part No.1 2 1502 Female Flange DNV Certified Material 1 267PN262 O-ring 1 1079743 Seal 2 1502 Weco 1 901SH06-14-1/2 TO 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 2 1502 Female Flange Standard Material 1 267PN072 1502 Female Flange DNV Certified Material 1 PP10082932 O-ring 1 1079773 Seal 2 1502 Weco 1 901SH06-1301WPD997 Page 29

2.5 1002 HAMMER UNION DISCHARGE FLANGESTANDARD FLUID ENDS3-1/2 TO 4 FLUID ENDSRefNo. Name of Part Qty. Part No.1 2.5 1502 Female Flange Standard Material 1 267PN082.5 1502 Female Flange DNV Certified Material 1 PP10082942 O-ring 1 1079743 Seal 2.5 1002 Weco 1 901SH06-3301WPD997 Page 30

3 1002 HAMMER UNION DISCHARGE FLANGESTANDARD FLUID ENDS3-1/2 TO 4 FLUID ENDSRefNo. Name of Part Qty. Part No.1 3 1002 Female Flange Standard Material 1 267PN133 1002 Female Flange DNV Certified Material 1 PP10082952 O-ring 1 1079743 Seal 3 1002 Weco 1 901SH06-24-1/2 TO 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 3 1002 Female Flange Standard Material 1 267PN053 1002 Female Flange DNV Certified Material 1 PP10082912 O-ring 1 1079773 Seal 3 1002 Weco 1 901SH06-2301WPD997 Page 31

3 1502 FEMALE HAMMER UNION DISCHARGE FLANGESTANDARD FLUID ENDS3-1/2 TO 4 FLUID ENDSRefNo. Name of Part Qty. Part No.1 3 1502 Female Flange Standard Material 1 267PN0293 1502 Female Flange DNV Certified Material 1 PP10082972 O-ring 1 1079743 Seal 3 1502 Weco 1 901SH06-24-1/2 TO 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 3 1502 Female Flange Standard Material 1 267PN0303 1502 Female Flange DNV Certified Material 1 PP10082982 O-ring 1 1079773 Seal 3 1502 Weco 1 901SH06-2301WPD997 Page 32

BLEED OFF DISCHARGE FLANGESTANDARD FLUID ENDS2-1/4 TO 3 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Bleed Off Flange Standard Material 1 268PN04Bleed Off Flange DNV Certified Material 1 PP10083002 O-ring 1 1079703-1/2 TO 4 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Bleed Off Flange Standard Material 1 268PN05Bleed Off Flange DNV Certified Material 1 PP10083012 O-ring 1 1079744-1/2 TO 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Bleed Off Flange Standard Material 1 268PN01Bleed Off Flange DNV Certified Material 1 PP10082992 O-ring 1 107977301WPD997 Page 33

BLIND DISCHARGE FLANGESTANDARD FLUID ENDS2-1/4 TO 3 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Blind Flange Standard Material 1 265PN005Blind Flange DNV Certified Material 1 PP10082892 O-ring 1 1079703-1/2 TO 4 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Blind Flange DNV Certified Material 1 265PN0062 O-ring 1 1079744-1/2 TO 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Blind Flange Standard Material 1 265PN004Blind Flange DNV Certified Material 1 PP10082882 O-ring 1 107977301WPD997 Page 34

DISCHARGE OPTIONS FOR AUTOFRETTAGED FLUID ENDSDISCHARGE PORT BUSHING & O-RINGS ASSEMBLYAUTOFRETTAGED FLUID ENDSAssembly Part Number: 405TWC4038RefNo. Name of Part Qty. Part No.1 Port Bushing 1 4034000902 O-ring 2 1698283 Back-up Ring (for Item 2) 2 429003000BLIND DISCHARGE FLANGE ASSEMBLYAUTOFRETTAGED FLUID ENDSAssembly Part Number: 400TWC4038RefNo. Name of Part Qty. Part No.1 Port Bushing 1 4034000902 O-ring 2 1698283 Back-up Ring (for Item 2) 2 4290030004 Plug 1 4034040905 Wing Nut 1 403403000301WPD997 Page 35

2 1502 FEMALE DISCHARGE FLANGE ASSEMBLYAUTOFRETTAGED FLUID ENDSAssembly Part Number: 402TWC4038RefNo. Name of Part Qty. Part No.1 Port Bushing 1 4034000902 O-ring 2 1698283 Back-up Ring (for Item 2) 2 4290030004 2 1502 Female Treating Adapter 1 4791970905 Wing Nut 1 4034030003 1502 FEMALE DISCHARGE FLANGE ASSEMBLYAUTOFRETTAGED FLUID ENDSAssembly Part Number: 403TWC4038RefNo. Name of Part Qty. Part No.1 Port Bushing 1 4034000902 O-ring 2 1698283 Back-up Ring (for Item 2) 2 4290030004 3 1502 Female Treating Adapter 1 5209150905 Wing Nut 1 403403000301WPD997 Page 36

2 2002 FEMALE DISCHARGE FLANGE ASSEMBLYAUTOFRETTAGED FLUID ENDSAssembly Part Number: 404TWC4038RefNo. Name of Part Qty. Part No.1 Port Bushing 1 4034000902 O-ring 2 1698283 Back-up Ring (for Item 2) 2 4290030004 2 2002 Female Treating Adapter 1 PP10018525 Wing Nut 1 403403000301WPD997 Page 37

SUCTION MANIFOLD OPTIONS4 SUCTION MANIFOLD WITH VICTAULIC ENDS2-1/4 TO 3 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 304WPD0692 O-ring 3 1079813-1/2 TO 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 117PN0102 O-ring 3 25BC333301WPD997 Page 38

4 SUCTION MANIFOLD WITH VICTAULIC ENDS AND VALVE LIFTERS2-1/4 TO 3 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 116PN0062 O-ring 3 1079813 Lifter Disc 3 595PN014 Lifter Shaft 3 595PN025 Coupling 3 595PN036 Push Rod 3 595PN047 O-ring 6 1079568 Hex Nut 3 50AQ33-1/2 TO 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 116PN0052 O-ring 3 25BC3333 Lifter Disc 3 595PN014 Lifter Shaft 3 595PN025 Coupling 3 595PN036 Push Rod 3 595PN047 O-ring 6 1079568 Hex Nut 3 50AQ3301WPD997 Page 39

6 SUCTION MANIFOLD WITH VICTAULIC ENDS2-1/4 TO 3 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 117PN0052 O-ring 3 1079813-1/2 TO 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 117PN0062 O-ring 3 25BC333301WPD997 Page 40

6 SUCTION MANIFOLD WITH VICTAULIC ENDS AND VALVE LIFTERS2-1/4 TO 3 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 116PN0042 O-ring 3 1079813 Lifter Disc 3 595PN014 Lifter Shaft 3 595PN025 Coupling 3 595PN036 Push Rod 3 595PN047 O-ring 6 1079568 Hex Nut 3 50AQ33-1/2 TO 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 116PN0022 O-ring 3 25BC3333 Lifter Disc 3 595PN014 Lifter Shaft 3 595PN025 Coupling 3 595PN036 Push Rod 3 595PN047 O-ring 6 1079568 Hex Nut 3 50AQ3301WPD997 Page 41

4 SUCTION MANIFOLD WITH VICTAULIC ENDS & CLEANOUTS2-1/4 TO 3 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 305WPD0692 O-ring Fluid End 3 1079813 Cap Cleanout with O-ring 2 4154130005 SUCTION MANIFOLD WITH VICTAULIC ENDS3-1/2 TO 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 PP10034522 O-ring Fluid End 3 25BC333301WPD997 Page 42

5 SUCTION MANIFOLD WITH 150# RF FLANGE ENDSWith Extended Drop2-1/4 TO 3 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 PP10038642 O-ring 3 1079813 Cap Cleanout with O-ring 2 4154130005 SUCTION MANIFOLD WITH 150# RF FLANGE ENDS3-1/2 TO 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Suction Manifold 1 PP10038652 O-ring 3 25BC3333 Cap Cleanout with O-ring 2 415413000301WPD997 Page 43

FLUID END SERVICE TOOLS2-1/4 FLUID ENDRefNo. Name of Part Qty. Part No.1 Packing Nut Wrench 1 200OPB9332 2 Hex Wrench 1 P-A-093 Slide Hammer Puller 1 590PN0062-3/4 THRU 4 STANDARD FLUID ENDSRefNo. Name of Part Qty. Part No.1 Packing Nut Wrench 1 200OPB9332 2 Hex Wrench 1 P-A-093 Slide Hammer Puller 1 590PN0064 Valve Spring Compressor 1 211AD01-35 Puller - Suction Valve Spring Retainer 1 590PN012-3/4 THRU 3 AUTOFRETTAGED FLUID ENDSRefNo. Name of Part Qty. Part No.1 Packing Nut Wrench 1 200OPB9332 2 Hex Wrench 1 P-A-093 Slide Hammer Puller 1 590PN0064 Slide Hammer Left-hand Thread Adapter 1 PP10015805 Jam Nut 1 50B56 Valve Spring Compressor 1 211AD01-37 Puller - Suction Valve Spring Retainer 1 590PN014-1/2 THRU 5 FLUID ENDSRefNo. Name of Part Qty. Part No.1 Packing Nut Wrench 1 200OPB9332 2 Hex Wrench 1 P-A-093 Slide Hammer Puller 1 590PN0064 Valve Spring Compressor 1 211AD01-45 Puller - Suction Valve Spring Retainer 1 590PN01301WPD997 Page 44

VALVE SEAT PULLER KITSRefNo. Name of Part Qty. Part No.1 2.25 Valve Seat Puller Kit* 1 403WPD2041(*Includes the following 3 items)* Seat Puller Rod/Wedge Assembly 1 QBX91108* Puller Head Assembly 1 203QBX2192 2.75 3 Valve Seat Puller Kit* 1 406THD6031(*Includes the following 3 items)* Seat Puller Jack Assembly 1 PP1013245* Puller Head Assembly 1 HY-1* Tool Box 1 H-4003 3.5 4 Valve Seat Puller Kit* 1 402THD6031(*Includes the following 3 items)* Seat Puller Jack Assembly 1 102014* Puller Head Assembly 1 HG-3* Tool Box 1 H-4004 4.5 5 Valve Seat Puller Kit* 1 403THD6031(*Includes the following 3 items)* Seat Puller Jack Assembly 1 102014* Puller Head Assembly 1 HR-4* Tool Box 1 H-400301WPD997 Page 45

For additional information contact your local representative orGardner Denver Inc.4747 South 83 rd East Avenue, Tulsa, OK 74145PH: (918) 664-1151, (800) 637-8099FAX: (918) 664-6225www.gardnerdenver.comSpecifications subject to change without notice.Copyright © 2005 Gardner Denver, Inc. Litho in U.S.A.