Type 8 Models - Hunter Fan Company
Type 8 Models - Hunter Fan Company
Type 8 Models - Hunter Fan Company
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7 • Installing the Switch HousingSide HolesSteps 7-1 – 7-27-1. Connect the upper plug connector from the motor to the lowerplug connector in the switch housing assembly.Note: Both plug connectors are polarized and will only fit togetherone way. Make sure the connectors are properly aligned beforeconnecting them. Incorrect connection could cause improperoperation and damage to the product.7-2. To attach the switch housing, thread the screws through the sideholes of the mounting plate and tighten them securely.Note: If you are installing the light fixture, proceed to 8 • Installing theLight Fixture. If you are not installing the light fixture, proceed withsteps 7-3 – 7-4 to complete the installation.7-3. Thread the finial with rod (from the sack parts) through the switchhousing cap and into the switch housing.7-4. Tighten the finial.SwitchHousingFinialSwitchHousingCapSteps 7-3 – 7-41041968-01 • 10/02/08 • <strong>Hunter</strong> <strong>Fan</strong> <strong>Company</strong>