Download - O Scale Trains Magazine Online

Introducing Turntables from Ross Custom Switches!Our new turntables are ready. After two years of development and testingRCS proudly introduces our new line of turntables.Product# Description PriceManually Indexing Turntable (line up tracks by eye)TUTA18M 18” Turntable with manually indexing motor $949.95TUTA24M 24” Turntable with manually indexing motor $1149.95TUTA27M 27” Turntable with manually indexing motor $1199.95TUTA33M 33” Turntable with manually indexing motor $1299.95Automatic Indexing TurntableTUTA18A 18” Turntable with Automatic indexing motor $1349.95TUTA24A 24” Turntable with Automatic indexing motor $1549.95TUTA27A 27” Turntable with Automatic indexing motor $1599.95TUTA33A 33” Turntable with Automatic indexing motor $1699.95Shipping on these items are as follows:18” and 24” turntables: $100 • 27” and 33” turntables: $125Precision made using a CNC cut 3/4” cabinet grade, no-warp, 13 ply baltic birch frame and pit, 7 ball androller thrust bearings, 1” ground center shaft, CNC cut 18” drive gear, mated to an automotive type, nostretch,timing belt for perfect grip all the time. Stepper motor with electronic controls and power supplyfor automatic indexing with speed (rpm) set by you, or heavy duty gear reduction motor with manual andinfinite low speed control and power supply. Full bridge with detail will accept many types of two andthree rail track. Track spacing at 7.5 or 15 degrees. Pre-wired with an industrial turntable track powerconnector and will transmit remote train controller commands of various manufacture. A square hole 6”larger than the bridge length is required. Motor drive hangs down appx. 10.5” Below table.22 • O Scale Trains - July/Aug ’09Don't forget our line of auto indexing transfer tables as well!See www.rossswitches.com for full details on all our productsor call 1-800-331-1395.