SAM4s SPS-500 series Operators Manual.pdf

Safe Operation• Do not locate your SAM4s SPS-500 in a damp or wet environment. Avoid high humidity, directsunlight and temperature extremes.• Always plug your SPS-500 into a grounded three-prong outlet. Never use two-prong adaptors orungrounded outlets.• Check to make sure the power outlet provides the correct voltage: (120V +/- 10%).• Immediately disconnect the ECR from the power source in case of spilled liquid in the ECR, smoke,or strange smells. Call your authorized dealer for assistance.• Do not operate the ECR with wet hands.• Use a soft dry cloth to clean the ECR cabinet. Do not use wet cloths or solvents.• Do not open the ECR case to attempt repairs. Dangerous voltages can cause shock. Service attemptsby untrained personnel can cause unnecessary damage to your ECR.Important Battery Backup NoteBefore using the SAM4s SPS-500 for the first time, leave it powered on in the REG key lock position forat least twenty-four hours. This allows the Ni-MH battery, which maintains the memory of the ECRwhile the power is off, to charge completely.SAM4s SPS-500 Configurations• The SPS-520RT features two 2” printers (receipt/journal) with a raised-key keyboard• The SPS-520FT features two 2” printers (receipt/journal) a flat spill-resistant keyboard• The SPS-530RT features one 3” printer with a raised-key keyboard• The SPS-530FT features one 3” printerwith a flat spill-resistant keyboardStandard HardwareThe SPS-500 series features a 7” TFT-LCD backlit color touch screen, in addition to traditional ECRcomponents:• Flat 160-position keyboard or a 90-position keyboard with traditional raised keys,• Receipt or receipt/journal printer configurations,• Key lock security with Void, Off, Register, X, Z, P (program) and S (service) positions,• Heavy duty metal cash drawer• Two-line alphanumeric rear display8 • Introduction SAM4s SPS-500 Operator Manual prelim