SAM4s SPS-500 series Operators Manual.pdf

SPS-500 Delivery SystemDelivery System Features• Customer records (called “Delivery Tables”) are stored in the SPS-500 memory. The number ofDeliver Tables is defined in memory allocation (each requiring 664 bytes), with a maximum of 9999records.• Eleven customer information fields are stored for each delivery table.• Orders are tracked by assigning one of the four available tracking files to hold delivery orders• The Delivery function key is used to initiate a delivery transaction. When touched, the Delivery keyopens the customer record screen. Here existing accounts can be opened, new accounts created, orexisting accounts deleted.• The Last Purchase function is available from the delivery customer record screen. Touch the LastPurchase key to view a record of the last 48 items purchased by the delivery customer. The items areviewed under three tabs, each listing up to 16 items. Items viewed here can be quickly selected andreordered.• The Park Delivery function key allows you to accept orders and hold them for preparation anddelivery at a later time.• The Serv Delivery function key releases held parked orders for preparation.Delivery Related Programs• Set the number of delivery tables: S/Memory Allocation/Option #33.• Use tracking file #1 for delivery tracking: S/System Options/Option #21.• Set Tracking files as you would any in other tracking system:○ Set the register number that holds check tracking data and the register that hold back-up data(S/System Options/Option s#10 & 11 -- for single register systems, just set the register number.)○ Set Memory Allocation for number of lines per check and maximum number of checks(S/Memory Allocation/Options # 11 & 12). Be certain that the number of tracking files availableexceeds the number of delivery tables Allocated• Use the Key Relocation program to assign function keys as necessary: Delivery (function key code#069); Park Delivery (function key code #070); Serv Delivery (function key code #071).• Use the Key Relocation program to assign Store Check 1, Recall Check 1, and List Check 1function keys. Use the default options for the Recall Check 1 key, do not enable drive thru, set“assigned by register” to No, and set the length of Check# in Digits” to 00.58 • Advanced Application Operations SAM4s SPS-500 Operator Manual prelim