SAM4s SPS-500 series Operators Manual.pdf

Electronic Payment – Merchandise Return1. Complete the merchandise return transaction as you would a normal transaction. Press or touchMDSE RTRN prior to entering each returned item.2. Press or touch the appropriate MISC TEND key. The message “SLIDE CARD” displays.3. Swipe card. The message “WAITING RESP.” displays until the card verification is complete.4. When verification is complete, the draft is printed.Electronic Payment – Void TransactionTransaction Void allows a transaction to be voided from the batch and not reported to the cardholderstatement.1. Press or touch the VOID MODE key.2. Enter items.3. Press/touch or tender into the appropriate MISC TEND key. The message “SLIDE CARD” displays.4. Swipe card. The message “ENTER AUTH CODE.” displays.5. Enter the authorization code printed for the transaction to be voided, press or touch OK.6. The message “ENTER REF CODE” displays. Enter the Reference number from the transaction to bevoided. Press or touch OK.7. The message “WAITING RESP.” displays until the transaction is found and the original recordvoided.Foreign Currency Subtotal & Tender1. Enter items2. Press or touch the appropriate conversion key, which is pre-programmed with the exchange rate (forexample, a Canadian Dollar may be worth $0.75 US.)3. Enter amount tendered in foreign currency and press or touch CASH. Note that change is computedin home currency.Food Stamp Subtotal & TenderFood Stamp options include:• The FD/S TEND key can be programmed to forgive tax on items paid for with food stamps.• Food Stamp change of less than $1 can be applied toward the sale or given as change.Consult with your installing dealer to verify that food stamp programming is set to correspond with foodstamp merchant rules in your area.To complete a food stamp transaction:1. Enter items. (Food stamp eligibility is pre-set for each item.)2. Press or touch FD/S SUBTL. The total of items eligible for food stamp payment displays:3. Enter food stamp tender amount, press or touch FD/S TEND.50 • Basic Operations SAM4s SPS-500 Operator Manual prelim