SAM4s SPS-500 series Operators Manual.pdf

Check CashingA separate function key is available for check cashing. Check cashing limits may apply and a manager codemay be needed to complete the transaction.Enter the amount of the check to be cashed, press or touch the CHECK CASH key. The cash andcheck-in-drawer totals will be adjusted appropriately.Miscellaneous (Charge) TenderUp to sixteen miscellaneous tender keys are available for accepting various types of charges. Each key can beconfigured separately with maximum charge limits, tendering requirements/rules, tax exemption rules andvalidation requirements. Operation sequences will vary depending upon the situation. (See “IntegratedPayment System Operations” below where an integrated electronic payment system is used.)To accept a miscellaneous tender payment:Press or touch the MISC TENDER key, or (where allowed) enter the amount of the cash tenderedand press or touch the MISC TENDER key. The register will display the change due.Preset TenderMacro keys can be programmed to execute preprogrammed amount tenders for common currencies such as$5, $10 or $20 cash.Split TenderMultiple payments can be recorded for a single transaction. Cash, Check, and/or Misc. tenders can berecorded in any order, as many times as necessary to pay the entire transaction.Integrated Payment System OperationsCredit Transaction1. Enter items.2. Press or touch or tender into the appropriate MISC TEND key. The message “SLIDE CARD”displays.3. Swipe card. The message “WAITING RESP.” displays until the card verification is complete.4. When verification is complete, the draft is printed.48 • Basic Operations SAM4s SPS-500 Operator Manual prelim