SAM4s SPS-500 series Operators Manual.pdf

Auto Tare Weight1. Place the item on the scale.2. Press or touch the SCALE key to display the weight.3. Register the open or preset PLU.Manual Tare Weight Entry1. Place the item on the scale.2. Enter the tare # and press or touch the SCALE key to display the weight less the tare.3. Register the open or preset PLU.Open Tare Weight Entry1. Place the item on the scale.2. Press or touch 20. This will call for tare 20, which is an open tare.3. Press or touch the SCALE4. Press or touch the decimal [.], then the numeric 3. This will enter a tare weight of 0.3 lb.5. Press or touch the SCALE key.6. Register the open or preset PLU.Print KeyThe PRINT key allows the operator to send items to the kitchen printer. Use the PRINT key (or label thekey GRILL) to send items wouldn't normally go to a kitchen printer or send items that require specialattention. All printer output made using the key is in addition to regular output.To use the PRINT key function, press or touch the PRINT key before the first item and immediately after thelast item to want printed for special attention.1. Press or touch PRINT.2. Enter the item and condiments or instructions.3. Press or touch the PRINT key again to send the item & instructions to the printer identified on thePRINT key.Note: The PLU Status Group flag #28 “Print on KP?” must be set to Y (yes) for items that are to besent to a printer via the PRINT key.The PRINT key also sends items in group sequence using the “meal order feature” available at version 2.02nor later. Items are given a meal order priority through group programming. Each time the PRINT key ispressed/touched, the next priority of items will be release to the kitchen printer.SAM4s SPS-500 Operator Manual prelim Basic Operations • 41