SAM4s SPS-500 series Operators Manual.pdf

NO DRAWER!The employee currently signed on is not assigned to a drawer, and is not allowed to perform cash sales, orthe drawer is no longer attached and is required in order to continue.NO MANUAL ENTRYManual entry is not allowed (scale function).NO PAPERSlip printer is out of paper, appears when printing to a loose-leaf printer.NO PLU!The number entered is not a valid PLU. This message will also appear if a PLU number “built” usingmodifier keys recalls an invalid PLU number.NONADD# REQUIREDThis operation requires the entry of a Non-Add number to fulfill the compulsory requirements.NOT DISCOUNTABLEThe preceding entry is not discountable, product is not available for discounting.NOT PROGRAMMED!This key has not been programmedNOT READY!Remote printer is not ready for printing tasks.NOT ZERODisplayed when trying to delete a PLU that still has sales counts and stock amounts. The PLU mustfirst be reset and cleared from all Z Mode reports.OFF LINE!IRC communications have gone off line.OPEN DRAWERThe register has been programmed not to operate with the cash drawer open.OVERRIDE NOT ALLOWEDX-Mode override is not allowed for this operation.P/BAL REQUIRED!This register has been programmed to require a previous balance entry.PAPER ENDThe guest check printer has reached the end of the form, or the Receipt/Journal paper is at, or near, theend of its roll.RANGE OVERThe number entered is out of range.REMOVE PAPERValidation is complete and the paper must now be removed.SAM4s SPS-500 Operator Manual prelim Getting Started • 31