SAM4s SPS-500 series Operators Manual.pdf

ERRORGeneral error message.ERROR JAMReceipt / journal printer jammed message.GALLON AMOUNT REQUIREDThis entry involves a gallonage PLU, and requires an amount entry.HALO OVER!The amount entered exceeds the programmed HALO i.e. the task exceeds the maximum amount allowed.ILLEGAL KEY SEQUENCEThe operator has used an illegal key sequence.IN USE!This guest check or clerk number is already open elsewhere in the system. This is also applicable whenthe floating clerk system is activated and the operator is in use on another terminal.INACTIVE!The key touched is inactive. This message also appears if VOID Mode has been disabled.INPUT QTYQuantity input is required for a condiment WLUKITCHEN PRINTER FAILUREThe kitchen printer has failed to respond. Printing has been re-routed to the designated back-up printer isprogrammed.MANAGER OVERRIDE REQUIREDThe manager password must be input in order to override a HALO amount, or other restriction.MANAGER REQUIREDThe manager password must be input to complete this operation.MEMORY FULLMemory is full.NEGATIVEThis sale has gone negative. Negative sales are programmed as not allowed.NO CHECK #This message appears when the system cannot find this guest check number.NO DATAPLU can not be found (does not appear in Register Mode). Usually associated with stock entry on an IRCsystem when the PLU exists in one terminal but not another. On the terminal where the PLU does notexist the message not found will appear.30 • Getting Started SAM4s SPS-500 Operator Manual prelim