SAM4s SPS-500 series Operators Manual.pdf

pick up the previous balance again in order to continue with finalization. In a soft check environment,this message will appear when the check has reached capacity (maximum lines stored). The register willrequire the sale to be finalized with the option of printing a bill if requiredBUSYDestination register is busy (pre poll memory is in use). Requires a clear command from the P.C. orRegister.CASH DECLARATION REQUIREDCash declaration has been programmed as compulsory, and must first be performed before reportsCASH-IN-DRAWER LIMIT EXCEEDEDThe programmed Cash-In-Drawer limit has been exceeded.CHECK KEY POSITIONThe key lock is in the wrong position.CHECK# IS ASSIGNED AUTOMATICALLYThe operator has attempted to open a new guest check by assigning a check number. The register hasbeen programmed to generate its own check numbers.CHECK# REQUIRED!This register has been programmed to force check number entry to begin a transaction. An existing guestcheck must be recalled, or a new one started.CONDIMENT REQUIRED!This PLU has been programmed to require a condiment entry.CRC ERRORAn error has occurred in the block check sum while transferring data in IRC mode.DUPLICATE!This check already exists. May also apply to secret code programming.ANALYSIS 1?/ANALYSIS 2?/ANALYSIS 3?This operation is set for compulsory entry of one of the three analysis keys.ENTER EMPLOYEE CODEThe employee is required to sign on before performing a task.ENTER GUEST COUNTThe operator must enter the number of guests when opening a guest check, or beginning a sale.ENTER SEAT#Seat # entry required before operation can continue.ENTER TABLE#Table number entry is required to open a guest check, or begin sale.ENTRY REQUIREDThe function selected from the WLU requires a numeric entry, i.e. a percentage for an open percentdiscount.SAM4s SPS-500 Operator Manual prelim Getting Started • 29