SAM4s SPS-500 series Operators Manual.pdf

PARK ORDER 246 Used in conjunction with a kitchen video system and the SERVEORDER function key. Enter a number and touch PARK ORDER topark or "suspend" an order on the video monitor until the order iscompletely filled. In the case of a drive through order that cannot becompleted when the customer arrives at the pick-up window, theoperator would park the order until it was completely filled. The orderwould then be served or bumped by using the SERVE ORDER key.SERVE ORDER 247 Used in conjunction with a kitchen video system and the PARKORDER function key. Enter a number and touch SERVE ORDER toserve or bump the order from a video monitor. No video keypad isneeded for this function.KP ROUTING 248 The KP ROUTING key is used to override KP Time Period control.For example, a restaurant might normally operate two kitchens at onetime and one kitchen at other times. In case the volume of businesschanges, the manager might want to control the KP routing manually.Also, a single item, or large order might be required to be sent to adifferent printer than normal. Select STAYDOWN or TRANS. POPUP. To operate, before the transaction, touch [1] [KP ROUTING] forperiod one or [2] [KP ROUTING] for period two.SPLIT CHECK 249 The Split Check function provides another method of breaking downchecks for payment. Note that this method works best when checknumbers are not automatically assigned. Many programmers/installerswill use the table number as the check number, and in this situation thefeature works quite well.Place a “Split Check” key on the screen. Recall a check (table). Selectthe item you wish to place on a new check by touching the item on thedisplay, then touching [Split Check]. Note that an asterisk (*) nowdisplays next to the item. Continue to mark additional items to beassigned to a different check as necessary. Touch [Store Check]. Theprompt will ask you to enter the number of the check you wish thedesignated items to be assigned to. Enter the check (table) number andtouch OK. The original check with be stored automatically and the newcheck with the split items is open for storing or payment.If you wish to use the split check feature in applications where checksare automatically assigned, you must first open and store a new check.Make note of the check number. Then open the check from which youwish to split items from. Identify the items using the [Split Check] keyas described above. Then when prompted to enter the number of thecheck where the selected items are to be assigned, enter the number ofthe new check you previously created.ALPHA TEXT 250 Use to type a name or message that will be associated with a soft check.Touch the ALPHA TEXT key anytime after a check has been opened,then type a message (up to 15 characters) using the alpha keyboardoverlay and touch OK. Multiple message lines can be entered. Themessage is saved and printed/displayed with the order. A system optioncontrols whether the message is printed on the guest check.SAM4s SPS-500 Operator Manual prelim Getting Started • 27