SAM4s SPS-500 series Operators Manual.pdf

AppendixReport Function Key Report Code StructureYou can print out reports from the REG positon using the REPORT function key. Reports are generated byfirst entering the report code, then touching the REPORT key, i.e:[Report Code] [REPORT]The REPORT key code is #36.Report Code Structure0101001. Enter the 2-digit report number. See the “Report Table” below.2. Enter “0” for X reports; enter “1” for Z reports3. Enter the report level: “1” through “5”4. Enter “0” for standalone reports: enter “1” for IRC reports, (or “2’ to viewIRC for all registers without entering the IRC range).5. Enter the option code, 1-4 digits. See the “Report Option Table” below. Ifno option is selected, enter “0”.The report code example above “010100” generates an X1 Standalone Financial Report.Report # TableNO. REPORT NAME X/Z & REPORT LEVEL IRC01 Financial X1 & Z1 also X5 to Z5 INDIVIDUAL & IRC02 Sales by Time Period X1 & Z1 also X5 to Z5 INDIVIDUAL & IRC03 All PLU’s X1 & Z1 also X5 to Z5 INDIVIDUAL & IRC04 Not use this by REPORT key function.05 PLU’s by Group X1 & Z1 also X5 to Z5 INDIVIDUAL & IRCSAM4s SPS-500 Operator Manual prelim Appendix • 135