cover RPD15F,25F.qxp - Chamberlain

BFully unroll the shutter (a). Remove the shutter material fromthe tube (b). Remove the manual control (c).CRemove the tube.en-3cabDPush the motor (1) completely into the tube. The limit switchoperates only if the drive unit is fully inserted. Ensure that theadapter ring is pushed fully home. Do not force it or strike it.Do not damage the tubular motor by drilling!D1EEProceed according to the specific requirements forleft-sided (a) or right-sided (b) operation.abFSecure the mounting bracket (6) to the wall(use suitable screws and plugs).GInsert the motor (a) into the mounting bracket (6) and secure it.66aHCorrect InstallationThe illustration shows the motor (a), the wall bracket on the drive side (b), the steel tube (c), the end cap (d) and the opposite tube bracket (e).dcaeb