9400 Specifications - Zenitel

More documents

Recommendations

Info

C. AlphaCom E system capacity shall include a modular central exchange cabinet wired andequipped for the necessary stations and speech channels. System shall be expandable by addingplug-in boards and modules to approximately 140,208 stations. The system shall have thecapability to be expanded to multi-mode operation with remote sites, using transparent dialingbetween remote modules. In addition, the central exchange shall also include 50 simplexconference channels, and 100 programmable group call function circuits. The system will beprogrammed to restrict the local master stations from calling other local master stations.D. The 9400 system shall be placed in each wing and connected to the AlphaCom E via 1386 datacombiner board(s) via RS422 data circuits and up to 2-600 ohm 4-wire audio circuits. The 9400module shall have the capacity to control up to 100 substations or speakers. Up to 50 9400modules can be networked together with 4-wire 600 ohm audio and RS422 data. Each 9400module shall contain the necessary line boards and amplifiers to accommodate each wing’sstation capacity as indicated on the plans. The 9400 modules shall have double E proms forprogram storage and program back up. The module will have two independent speech channelslinked back to the main exchange. Systems with one speech channel will not be accepted.E. 9400 system shall be capable of supporting both 25V type substations by others and 9600 seriessubstations by Stentofon.F. Overhead paging shall be possible to the 9400 from the AlphaCom E exchange.G. The scope of the system shall include all features and functions described herein and theequipment shown on the plans. System shall be capable of adding optional features, equipmentand interfaces listed in the specifications, even if not initially included or shown on the plans. Acomplete operational system shall be provided. The system functions in public areas such aselevators, lobbies and parking areas shall comply with ADA requirements.2.3 SYSTEM CONFIGURATIONA. The AlphaCom E, 9400 Modules, power supplies, batteries, interfaces, page adapters,accessories, and main distribution board, shall be located in an appropriate secure dataprocessing room(s), separate from the telephone equipment room (as shown on the plans).B. System shall consist of duplex master stations with direct access buttons, with or withouthandsets, and with or without LCD displays, as indicated on the plans. Each master shall becapable of calling all other stations in the system unless specifically blocked or restricted throughprogramming.C. Security control room masters, and all other master stations shall be desk, flush, surface, wallmounted, or rack mounted as shown on the plans.D. Substations shall be flush or surface mounted, tamper and weather resistant where needed andlocated as required for direct access calling to control room masters, as shown on the plans.Specify if substations are to be connected to an AlphaCom E or to 9400 module.E. System shall include a "supervisor's" display type master control station at or near the centralexchange to function as system maintenance and fault indication station.F. All features and functions shall be programmed on site with a standard PC via Ethernet portconnection. Any system requiring a PC to run the system shall not be accepted.Zenitel USA - 6119 Connecticut Avenue – Kansas City, MO 64120 – 816/231-7200 – Fax: 816/231-7203 – www.zenitelusa.com
2.4 STANDARD SYSTEM FEATURES ALPHACOM E SYSTEMA. MASTER CALLS. A call shall be placed from any master station to any other station in the system,unless specifically blocked, by dialing the appropriate number of the desired station, or using oneof the direct access buttons. Either party can cancel call by pressing the (C) button.B. SUBSTATION CALLS. Each substation shall be programmed to call a specific master station(s).Pressing button on substation shall provide call request verification by blinking LED on station (ifequipped). A substation “call-request” call shall be identified on a display master, with textmessage, or flash an associated LED and sound a unique tone on a CRM type control roommaster.C. DIRECT ACCESS BUTTONS. All desk master stations shall include (10) direct access buttons,programmed for direct access calling, to allow single button speed dialing of other stations,features or telephone lines. Station user shall easily program direct access buttons at any time.Control room masters (CRMIV) shall have button modules available in (48) direct access buttonsize with each CRMIV capable of up to 96 direct access buttons.D. ALL-CALL. All master stations shall be able to initiate an all-call page to all other stations in thesystem. It shall be possible to remove stations, through programming, from receiving all-call andrestrict any station from initiating an all-call.E. GROUP-CALL. All master stations shall be able to initiate selective paging to predeterminedgroups of stations in the system. Ability to initiate group call shall be restricted to designatedstations. A station may be programmed for membership in several groups. It shall be possible toprogram up to 100 groups in AlphaCom E and an all call in 9400. There shall be no limitations tothe number of stations in any group. It shall be possible to program up to eight adjacent stationsout of a group call so as to eliminate audio feedback within AlphaCom E system. The system shallbe able to send out several group calls simultaneously. Each group shall have the ability to beassigned to one of 4 call announce chime tones.F. OVERHEAD PAGING. All master stations shall be able to dial or direct access into one, or more,voice paging system(s) for zoned and/or department paging over amplified speakers, unlessspecifically restricted through programming.G. AUTOMATIC SEARCH FEATURE. Each station shall have a pre-programmed list of actions thatcan automatically take place when their station is called but they are either busy, or in private orabsent. System shall allow call to be automatically rerouted to another station, call request, groupcall etc. Each station can have up to 3 different search call numbers.H. REPLY FEATURE. A person hearing a page or group call shall be able to begin an immediatenormal hands free conversation with the person who initiated the page, by simply pressing ananswer code, 99, on any convenient master station in the group. System shall allow multiplepage/reply functions simultaneously. The waiting time shall be programmable.I. DUPLEX/MANUAL OPERATION. Once call connection is established, normal conversation shalltake place in the “duplex” mode, whereby each person may talk “hands-free.” Each master shallhave a manual “M” button that shall be used to control the direction of the conversation (press totalk, release to listen) when communicating with a substation in 9400. Momentarily depressing"M" button shall restore duplex mode.J. REMOTE CONTROL FUNCTIONS. Each station port in the AlphaCom E exchange shall include(1 RCO (Remote Control Output) to be freely used for control of external equipment. AlphaComRelay Board 99702 required. See OptionsZenitel USA - 6119 Connecticut Avenue – Kansas City, MO 64120 – 816/231-7200 – Fax: 816/231-7203 – www.zenitelusa.com
Page 1 and 2: STENTOFON AlphaCom E - 9400A & E GU
Page 3: PART II: PRODUCTS2.1 ACCEPTABLE MAN
Page 7 and 8: e answered by momentarily pressing
Page 9 and 10: stations. This test can be performe
Page 11 and 12: Exchange shall provide (_6_) Remote
Page 13 and 14: D. DESK DISPLAY MASTER. Master shal
Page 15 and 16: J. STAINLESS STEEL SUBSTATION (OUTD
Page 17 and 18: 2.6.1 EQUIPMENT & PRODUCTS FOR 9400
Page 19 and 20: H. 96257-9 - SECURITY/EMERGENCY SUB
Page 21 and 22: B. STROBE CONTROL RELAY BOARD. Shal
Page 23: 3.5 ON-SITE SPARESA. The following

9400 Specifications - Zenitel

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?