9400 Specifications - Zenitel

PART II: PRODUCTS2.1 ACCEPTABLE MANUFACTURERSA. The systems as described here in, is based on the ALPHACOM E & 9400 intercom systemsmanufactured by ZENITEL USA, Kansas City, Missouri. The ALPHACOM E & 9400 system meetthe requirements of the specifications and shall be considered as the acceptable Base Bid.B. Substitutions must meet requirements of Prior Approval, as outlined in the contract documents.Substitutions that meet Prior Approval requirements must be listed as alternates by addendum,and shall be shown separately on the bid forms. Consideration will be based on ability to complywith all aspects of the specifications, the desired functional operation, quality, reliability, design,size, and appearance of the equipment, and the support capabilities of the manufacturer.2.2 SYSTEM DESCRIPTIONA. The purpose of the SECURITY COMMUNICATION SYSTEM shall be to provide fast “duplex,”(hands-free at both ends) voice communication as required to provide instantintercommunications for employees and visitors, emergency paging and signaling, alarmdistribution and audio program distribution. System shall assist with personnel safety, facilitysecurity, security systems integration, operational efficiency and maintenance functions. Duplexvoice communications shall be between intercom stations within the AlphaCom system. Voicecommunications between AlphaCom E and 9400 system shall be simplex (PTT) operation.B. The system shall be a microprocessor controlled system running embedded real time Linux, fully"digital", PC programmable, central switching exchange type using individual (2) twisted pair cablefrom the exchange to each station. The system shall be capable of automatic “duplex,” hands-freeoperation, without the use of handsets, at both the initiating and receiving station, and each stationshall include a condenser microphone and preamplifier. The exchange shall include 2 Ethernet IPports which can support protocols IP v4-IP v6, TCP, UDP, Telnet, FTP, NTP, HTTP 1.1, Syslog,SNMP v2c, SIP, RTP, RTCP, VoIP AlphaNet and 2 serial data ports, RS-232, RS-422 and RS485type, both input and output, for direct transfer of call processing functions to and from otherAlphaCom and AlphaCom Evolution (E-Series) exchanges as well as to external microprocessorcontrolled equipment such as 9400 intercom system, access control, CCTV switchers, remotecontrol boards and audio amplifiers. The exchange shall support the mix of IP and traditionalstations as desired. The exchange shall support SIP protocol to allow for interfacing to VoIPtelephones and or systems and equipment. The system shall provide special features such as thecapability of redundancy via IP, wideband audio (7kHz), built in firewall, integrated web & SIPserver as well as low latency switching. The exchange shall allow for remote programming,logging and maintenance via IP using AlphaPro as well as additional maintenance and statisticalinformation via IP using web browser to interface to AlphaWeb.Zenitel USA - 6119 Connecticut Avenue – Kansas City, MO 64120 – 816/231-7200 – Fax: 816/231-7203 – www.zenitelusa.com