9400 Specifications - Zenitel

2.6.1 EQUIPMENT & PRODUCTS FOR 9400 SYSTEMA. 9401 – INTERCOM MODULE CARD RACK (IMCR). The Card cage fits into a standard 19-inchrack for easy installation. The rack provides space for a power supply module (9490), one modulecontroller board (9440) and a maximum of 10 intercom module line boards (9450). Each card cagehas the capacity for a maximum of 100 substations per module. All connections on the back planeof module are either removable screw terminal connections or 50 pin Amphenol connections. Therack’s clear front cover allows installers and technicians to check status of the system withoutremoving the cover.Dimensions: 19” W x 10.5” H x 10” D9401 Card RackB. 9490X – INTERCOM MODULE POWER SUPPLY (IMPS). This plug in power supply provides 5,12 & 24VDC for the control boards installed in the 9401 rack. Power supply module will work overa wide range of ac voltage input (85-264 VAC). Power supply has overload protection and statusLED’s for each voltage. The power supply module can be equipped with 0-2 (X=0-2) of the 9680amplifiers for use with substations that use 45-ohm speakers (i.e. 9600 series of substations).Mounting of the power supply is done by slide rail into the 9401 rack. One 9490X power supplymodule is required for each 9401 rack installed.Dimensions: 1.1875” W x 8.5” H x 9.4375” DC. 9440 – INTERCOM MODULE CONTROLLER BOARD (IMCB). The module controller boardprovides all module control functions for the 9400 system. It provides two audio channels that willallow two simultaneous conversations. All customer programming is stored in EEPROM andprogramming is completed from a PC using a terminal emulation program such as WindowsHyperTerminal or 9400 programming software located on the Zenitel CD sent with your 9400. One9440 module controller board is required for each 9401 rack installed. Mounting is accomplishedby pushing board into back plane of 9401 rack.D. 9450 INTERCOM MODULE LINE BOARD (IMLB). The module line board supports up to 10substation positions per card. It provides the ability for 2-wire or 4-wire substations and has outputdrivers for LED’s for each 10 station ports on the line board. Up to two 9600 series substationsmay be connected to a single substation port with both stations having common audio and call in.Up to four 25V speaker substations can be connected to a single substation port with all fourstations having common audio and call in. The line board provides ability for 2 & 4 wire (LEDoption) 9600 series substations and also the ability for 2 wire 25V substations or 4 wire 25Vsubstations with call in capability. Maximum 10 IMLB boards may be installed into each 9401 rack.Zenitel USA - 6119 Connecticut Avenue – Kansas City, MO 64120 – 816/231-7200 – Fax: 816/231-7203 – www.zenitelusa.com