9400 Specifications - Zenitel

2.6.0 EQUIPMENT & PRODUCTS FOR ALPHACOM E SYSTEMA. STANDARD DESK MASTER. Master shall include the following controls: dialing buttons 0-9; Manual“M,” button for speech control and other functions; cancel “C” button; privacy slide switch and variablevolume control. Shall include 10 direct access buttons. Shall include a 3", 63 ohm, 1.6 watt speakerwith a sensitivity 88 dB, mounted in an acoustic baffle. Shall include an electret condensermicrophone with 100/300 mV output and sensitivity of -65 dB @1 kHz. Shall include a preamplifierwith a 600 ohm output impedance, and greater than 40 dB signal to noise ratio. Frequency responseof input and output shall be 300 to 10,000 Hz. Master shall be in a modern gray and black plastichousing, suitable for desk mounting, and have a six foot cord and plug. Shall be Stentofon #70362.B. DESK MASTER WITH HANDSET. Master shall include the following controls: dialing buttons 0-9;Manual “M,” button for speech control and other functions; cancel “C” button; privacy slide switch andvariable volume control. Shall include 10 direct access buttons. Shall include a 3", 63 ohm, 1.6 wattspeaker with a sensitivity 88 dB, mounted in an acoustic baffle. Shall include an electret condensermicrophone with 100/300 mV output and sensitivity of -65 dB @1 kHz. Shall include a preamplifierwith 600 ohm output impedance, and greater than 40 dB signal to noise ratio. Frequency response ofinput and output shall be 300 to 10,000 Hz. Master shall be in a modern gray and black plastichousing, suitable for desk mounting, and have a six foot cord and plug with addition of a lightweighthandset for confidential conversations. Color shall be black and gray. Shall be Stentofon #70342.70342C. WALL MOUNT STANDARD MASTER. Shall function exactly like a standard desk master but with allcontrols, speaker and microphone mounted on an extruded aluminum face plate, suitable for wallmounting. Shall include a sensitive condenser microphone and a 3" round, 63 ohm speaker with a 5ounce magnet. Finish shall be anodized aluminum. Mounts on #6020 flush or #6031 surface backbox.Shall be Stentofon #7040 and #7042 or #7045US.7040 7042 7045USZenitel USA - 6119 Connecticut Avenue – Kansas City, MO 64120 – 816/231-7200 – Fax: 816/231-7203 – www.zenitelusa.com