Tender Document - Pollution Control Board, Assam

More documents

Recommendations

Info

Item Code No.: 11Noise Level MeterMeasurement Range : Should cover 20 – 140 dBAError Indication : Over Range, under range and Low Battery.Accuracy/Class : Min. IEC 804 (BS 6698) Type-II or ANSI Type IIDisplay : Digital (Leq, SPL, L Max. and L Min.)Frequency Weighting : “A” type as per IS 15575 (Part I) 2005.* and CTime Weighting : Switchable to different time intervals i.e. 1/8 Sec., 1 Sec., 10Sec. etc. or Slow, Fast, Max.Temperature : 0° C to 50° CPower Supply : Battery System, Optional AC AdaptorMemory capacity : Sufficient memory to store atleast 8 hours dataCalibration : Automatic CalibrationComputer interface : Data logging system with RS 232 interfaceSoftware : The instrument is supplied with a Windows compatibleSoftware that allows data download to a PC and makes thedata available in an Excel Spreadsheet for analysis and reportpreparation.Accessories Required : 1. Calibrator2. Microphone3. Tripod stand4. Wind screen5. Batteries6. Carrying case or Kit7. Extension cable with pre amplifier21
Item Code No.: 12CO-HC ANALYZER (EXHAUST)01. Measuring method : Non Dispersive Infrared (NDIR) method02. Measurable components : Carbon monoxides (CO) andHydrocarbons (HC) in Automobileexhaust gases & facility formeasurement of No is preferable03. Measuring range : CO 0-5% and O-10%HC 0-500 ppm, 0-2000 ppm, and 0-10,000 ppm (as normal hexane)04. Reproducibility : Within 1% of full scale05. Stability : Within 1% of full scale / hour atconstant temperature06. Instrument deviation : Within 1% of full scale07. Accuracy for range selection : CO measurement within 1% of fullscaleHC measurement within 2% of fullscale08. Accuracy : Within 2% of scale at constanttemperature09. Response time : 90% response within 10 second with 5meter sampling line10. Drift : Zero & span drift ± 3% FS (3 Hr0 orless11. Calibration : By span gas. Built in calibration check12. Accuracy of span : Within ± 1-2% of the concentrationstated13. Warming up time : Within 30 minutes14. Interference effect from other gas : Less than 0.2 unit15. Ambient Conditions(a) Temperature(b) Humidity: 0-50 o CLess than 95% R.H.16. Display : Bright LED / LCD17. Printer : Built in or separate18. Power supply : 220 ± 10 V AC; 50 Hz ± 3%19. Accessories : For two years: filter paper for fine andcourse particles (two packets of 100each), calibration gas (two Cylinders),spares and consumable.20. Should have facility to transfer data to PC22
Page 1: Tender DocumentThis document contai
Page 4 and 5: 2.0 SUBMISSION OF BID1. The bid mus
Page 6 and 7: 12. The rates should be quoted both
Page 8 and 9: S. No.Annexure-IAPPLICATION FORM(To
Page 10 and 11: Annexure - IIIUNDERTAKINGDATE______
Page 12 and 13: Item Code No.: 01BOD IncubatorMater
Page 14 and 15: Item Code No.: 03Autoclave (Vertica
Page 16 and 17: Item Code No.: 05HOT AIR OVENSpecif
Page 18 and 19: Item code No.: 07COD DIGESTER with
Page 20 and 21: Item Code No.: 09Flame photometerMi
Page 24 and 25: Item Code No.:13FLUE GAS ANALYSERA
Page 26 and 27: Item code No.: 15SPECTROPHOTOMETER
Page 28 and 29: Item code No.: 17Flash Point Appara
Page 30 and 31: Item Code No.: 19Horizontal Laminar
Page 32 and 33: Item Code No.: 21Pesticides Standar
Page 34 and 35: Item Code No.: 23Stack Monitoring E
Page 36: CHECK LIST FOR THE BIDDER1. Bid on

Tender Document - Pollution Control Board, Assam

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?