Digi Master L-718 - Sekonic

(3) In the ambient light mode,(a) T-priority measurement orF-priority measurement canbe selected by pressing theF/T selection key (Fig. 7).4. Setting ISO sensitivityPress either side of UP/DOWN key whiledepressing ISO key. Film speed (ISOsensitivity) can be set within the range ofISO 3 ~ ISO 8000 (Fig. 9).The set value of ISO sensitivity ismemorized even if the meter is switchedoff or the measuring mode is changed.(b) EV measurement can beselected by pressing the F/EVselection key in the F-prioritymode (Fig. 8).5. Setting shutter speedPress either side of UP/DOWN key. Thedisplay of shutter speed can be changedwithin the range of 30min. ~ 1/8000sec.for ambient light measurement, and1sec. ~ 1/500sec. for flash lightmeasurement (Fig. 10).After the display of 1/8000sec. the cinescale is indicated (8, 16, 24, 32, 64 and128fps.). In this case the symbol C isdisplayed (Fig. 11).The set value of shutter speed (includingdine scale) is memorized even if themeter is switched off.1213