Digi Master L-718 - Sekonic

Memory Display FunctionDIGI MASTER is equipped with a memory function for measured 2 F-stopvalues. This function is usable for both wireless (cordless) and wiredmeasurements for a single flash light as well as ambient light measurementin T-priority mode, but not for cumulative flash measurement.(4) Memory mode is released bypressing the memory-off key(Fig. 30).(1) After measurement, press thememory key. The measured F-stopvalue is memorized and displayed inbar dot symbol (Fig. 27).(2) The number of measurement tobe memorized is limited up to 2(Fig. 28).(3) If you press the memory key after 2dots have been displayed, the thirddot starts flashing (Fig. 29). After 2or 3 sec., flashing stops and thethird dot is also remaining on thedisplay. This third dot is not adisplay of memorized value, and willbe replaced by the followingmeasurement.2021