Prinergy Evo and Kodak Proofing Software

2Setting up KodakProofing SoftwareEnabling unlicensed demo modeThis procedure is optional. Demo mode is available for Kodak ProofingSoftware only when the software is unlicensed and lacks a dongle.When Kodak Proofing Software is in demo mode, you can add asupported proofer (if you have one) or add simulated proofers (if youdon’t have a supported proofer), and use the Kodak Proofing Softwarefeatures. However, proofs print with a watermark, and simulatedproofers only simulate printing, but do not print.After using demo mode, you can license Kodak Proofing Software andstart using proofers for production work. Proofs will no longer print witha watermark. For more information, see the Kodak Proofing Software Help.1. In Proofer Administrator, click the Controller icon, and click theLicense tab.2. Select the Demo mode check box.3. Click the Proofers tab, and click Add.4. In the Add Proofers dialog box, select Add proofer to this controller,and then click Next.5. Follow the prompts in the Add Proofer Wizard.Note: If you do not have a supported proofer model, add a simulated proofer.Simulated proofer names end with (Simulated).6. After adding a proofer, the Proofer Controller might restart.Downloading configuration files from eCentralFor Matchprint Inkjet proofers, ICC profiles, ICC DeviceLink profiles, andmedia configurations are posted on Kodak eCentral ® . These downloadsare packaged into configuration files for each proofer model. Search,download, and install configuration files by proofer model.Note: To obtain media configuration files and other resources for Kodak Approval proofers, contact your service representative, or create media configuration filesusing the Approval Media Configuration Manager.1. Go to eCentral (https://ecentral.kodak.com/).2. At the top of the navigation bar, click Self Support and clickDownloads.3. In the Product list, select Matchprint Inkjet, and click Go.