Prinergy Evo and Kodak Proofing Software

8Improvedoutput formultiple MatchprintInkjet proofersIntroductionIf your Prinergy server struggles to keep multiple Matchprint Inkjetproofers running at full throughput, several solutions are available tohelp you increase the output:●●●Appropriate number of JTPsRender resolutionLoad balanceThe solutions are described in order of preference.Note: In Prinergy, disable the antialiasing feature to improve rendering time.Appropriate number of JTPs solutionRender resolution solutionRender resolutionTalk to your Technical Support Specialist to ensure that you have theappropriate number of Prinergy JTPs for the Matchprint Inkjet proofingworkload that you intend to process with your Prinergy software. Askabout the possibility of pooling your JTPs.The advantage of this solution is that you are using one piece ofsoftware (Prinergy) and one set of process templates to output proofs.Because of this, the risk of inconsistent settings is low. In addition, youare only using one RIP, and Prinergy supports the Certified Process forColor Confirmation.The disadvantage of this solution is that you must purchase eachadditional JTP.Use the render resolution feature available in Kodak Proofing Software3.1.5.25, 3.1.72, 3.2.0, and later to allow faster processing and transferspeeds. This feature lets you lower the render resolution for a mediaconfiguration without changing the resolution at which it will print onthe proofer. For example, for a media configuration that uses a 1440 x720 resolution, you can request that Prinergy render it at a 360 x 360resolution. With the smaller render resolution, Prinergy can render thejob faster and quickly pass the rendered job to Kodak Proofing Software,