Prinergy Evo and Kodak Proofing Software

More documents

Recommendations

Info

12 Chapter 4—Setting up process templates without ColorFlow3. In the Device section of the process template, set the followingoptions:●●In the Proofer Name list, select the name of the proofer.In the Proofer Model list, select the name of the proofer model.Some versions of software automatically display the proofermodel in this box.4. In the Layout section, set the following options:●●●In the Media Configuration list, select the appropriate proofermedia.In the Proofer Layout or Layout for Kodak Proofers list, selectthe Kodak Proofing Software layout with Certified Process forColor Confirmation disabled.Note: If you use the Certified Process for Color Confirmation, select theKodak Proofing Software layout with Certified Process for ColorConfirmation enabled.In the N-Up area, in the Number of Pages Across box and in theDown box, type 1.Note: This option is unavailable when you are setting up an output fromimposition process template.The Proofer Layout or Layout for Kodak Proofers list displays theenabled layouts in Kodak Proofing Software. The MediaConfiguration list displays the enabled media configurations inKodak Proofing Software. For more information, see the KodakProofing Software User Guide.If the imposition is smaller than a sheet’s imageable area, select a 1-Up layout. If the imposition is larger, select a Tiled layout. Forinformation about using layouts for doublesided media withMatchprint Inkjet proofers, see the Kodak Proofing Software UserGuide.If you are outputting imposition files (PJTF or JDF), the layout isdetermined in your imposition software (for example, the KodakPreps ® digital imposition software or the Kodak Pandora ® step-andrepeatsoftware), but it is limited to the proofer sheet size. That iswhy you must select a 1-up or tiled proofing layout for impositionfiles.5. In the Render section, set the following options:●●In the Resolution X and Resolution Y boxes, confirm that theresolution matches the resolution of the proofer that you aresending proofs to. If it does not, select a different mediaconfiguration in the Layout section.In the Spot Color Handling list, select Convert to Process.I6. In the Match Colors section, set the following options:For descriptions of ICC profiles, which you’ll need for every proofingprocess, see the description in Prinergy or the description in the
Editing output from PDF templates 13Proofer Administrator, where all of the ICC profiles are listed anddescribed.●For Profile, Select As defined below. Locate the ICC Profilesfolder, and select the source or DeviceLink profile that matchesthe color space you are simulating.Note: If you are using the Certified Process for Color Confirmation, ensurethat it is a signed profile. All default profiles are signed.●●●Note: When you select Refine Final Output Profile, Prinergy Evo uses thedestination profile (if there is one) from the refine process template as thesource profile.For Proof Profile, locate the ICC Profiles folder, and select aprofile that matches the device, media, resolution, and ink thatyou’re using.Note: If you are using the Certified Process for Color Confirmation, ensurethat it is a signed profile. All default profiles are signed.In the Rendering Intent list, select a rendering intent.In the Overprint Handling (CPU Intensive) list, select Raster.Note: It is important to select this option to optimize the colormanagement of files. However, processing time will increase when theoption is selected.7. In the Spot Color Handling section, set the following options:a. Select Lookup Recipe in Color Database to replace spot colorswith known reliable color recipes. If the software can’t find thoserecipes, it uses the recipes in the file.b. Select a color library. If the color libraries that you need areincluded in Prinergy Evo, select them in the Factory Libraries list.If you imported the color libraries you need, select them in theUser Libraries list. In a list that doesn’t contain the color librariesyou need, select None.8. Save the process template with a meaningful name that includes theproofer name (if the site has more than one proofer), media type,simulation space, and proofing process—for example, MPI-001-COM-MP-Certified.9. Create a submission channel (hot folder or virtual printer), andattach this process template to it. For information about submissionchannels, see the Prinergy User Guide.
Page 3 and 4: CopyrightTrademarks© Kodak, 2009.
Page 5 and 6: Contents1 Introduction.............
Page 7 and 8: 1IntroductionPrerequisitesThis user
Page 9 and 10: 2Setting up KodakProofing SoftwareE
Page 11 and 12: Creating a calibration 53. Click th
Page 14 and 15: 8 Chapter 3—Setting up Prinergy E
Page 16 and 17: 10 Chapter 4—Setting up process t
Page 22 and 23: 16 Chapter 5—Setting up ColorFlow
Page 32 and 33: 26 Chapter 7—Certified Process fo
Page 34 and 35: 28 Chapter 7—Certified Process fo
Page 36 and 37: 30 Chapter 8—Improved output for
Page 38 and 39: 32 Chapter 8—Improved output for
Page 40: Eastman Kodak Company343 State Stre

Prinergy Evo and Kodak Proofing Software

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?