Cluster Server Installation Guide for Solaris x64 5.0 - Storage ...

86 Manually installing and configuring VCSInstalling VCS software manually# gunzip *.gz3 If your system does not have the gunzip utility, copy it from the disc:# cp /cdrom/cdrom0/gnu/gunzip /tmp/install4 List the files:# ls /tmp/installinfo VRTScscw.tar VRTSllt.tar VRTSvcsag.tar SYMClma.tar VRTScssim.tarVRTScutil.tar VRTSvcsdc.tar VRTSacclib.tarVRTSat.tar VRTSpbx.tar VRTSvcsmg.tarVRTSvcsmn.tar VRTSgab.tar VRTSperl.tarVRTSsmf.tar VRTScmccc.tar VRTSicsco.tarVRTSjre.tar VRTSvlic.tar VRTScmcs.tarVRTScscm.tar VRTSspt.tar VRTSvxfen.tarVRTSweb.tar VRTSjre15.tar VRTSvcs.tarInstalling VCS packages for a manual installationVCS has both required and optional packages. Install the required packages first. All packages are installed in the /opt directory.When selecting the optional packages, note:■■■Symantec recommends that you install the packages for VCS manual pages(VRTSvcsmn) and VCS documentation (VRTSvcsdc). Install thedocumentation package on nodes where you want access to thedocumentation.The I/O fencing package (VCSvxfen) can be used only with shared disks thatsupport SCSI-3 Persistent Reservations (PR) . See the Veritas Cluster ServerUser’s Guide for a conceptual description of I/O fencing. You need to testshared storage for SCSI-3 PR and to implementI/O fencing.See “Setting up I/O fencing” on page 97.The VCS configuration wizard (VRTScscw) package includes wizards for theinstallation and configuration of Veritas products that require VCSconfiguration.■To use the Java Console with VCS Simulator, you must install the VRTScssimand VRTScscm packages.Perform the steps to install VCS packages on each node in the cluster.To install VCS packages on a node1 Extract the required VCS files from the compressed files:# tar -xvf VRTSvlic.tar# tar -xvf VRTSperl.tar