Cluster Server Installation Guide for Solaris x64 5.0 - Storage ...

More documents

Recommendations

Info

126 Setting up I/O fencingTroubleshooting I/O fencing■Destroy a coordinator disk groupNote: Adding or removing coordinator disks requires all services be shut down.Note the following about the procedure:■■■A coordinator disk group requires three disks/LUNs.When adding a disk, add the disk to the disk group vxfencoorddg and retestthe group for support of SCSI-3 persistent reservations.You can destroy the coordinator disk group such that no registration keysremain on the disks. The disks can then be used elsewhere.To remove and replace a disk in the coordinator disk group1 Log in as superuser on one of the cluster nodes.2 If VCS is running, shut it down:# hastop -all3 Stop I/O fencing on all nodes:# /etc/init.d/vxfen stopThis removes any registration keys on the disks.4 Import the coordinator disk group. The file /etc/vxfendg includes the nameof the disk group (typically, vxfencoorddg) that contains the coordinatordisks, so use the command:# vxdg -tfC import ‘cat /etc/vxfendg‘where:-t specifies that the disk group is imported only until the node restarts.-f specifies that the import is to be done forcibly, which is necessary if one or more disks is not accessible. -C specifies that any import blocks are removed.5 To remove disks from the disk group, use the VxVM disk administratorutility, vxdiskadm.You may also destroy the existing coordinator disk group. For example:# vxdg destroy vxfencoorddg6 Add the new disk to the node, initialize it as a VxVM disk, and add it to thevxfencoorddg disk group.See “Creating the coordinator disk group and setting the coordinatorattribute” on page 105.7 Test the recreated disk group for SCSI-3 persistent reservations compliance.See “Testing the coordinator disk group using vxfentsthdw -c” on page 111.8 After replacing disks in a coordinator disk group, deport the disk group:
Setting up I/O fencingTroubleshooting I/O fencing127# vxdg deport ‘cat /etc/vxfendg‘9 On each node, start the I/O fencing driver:# /etc/init.d/vxfen start10 If necessary, restart VCS on each node:# hastart
Page 1 and 2:
Veritas Cluster ServerInstallation
Page 3:
Technical supportMake sure you have
Page 6 and 7:
6 ContentsSetting up shared storage
Page 8 and 9:
8 ContentsChapter 5Setting up I/O f
Page 10 and 11:
10 ContentsChapter 8Chapter 9Adding
Page 12 and 13:
12 Contents
Page 14 and 15:
14 Introducing VCSVCS basicsFigure
Page 16 and 17:
16 Introducing VCSVCS basicsNetwork
Page 18 and 19:
18 Introducing VCSVCS basics
Page 20 and 21:
20 Preparing to install and configu
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
46 Installing and configuring VCSAb
Page 48 and 49:
48 Installing and configuring VCSIn
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
68 Installing and configuring VCSPe
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77: 76 Installing and configuring VCSCh
Page 78 and 79: 78 Installing and configuring VCSAb
Page 80 and 81: 80 Installing and configuring VCSAb
Page 82 and 83: 82 Installing and configuring VCSUn
Page 84 and 85: 84 Manually installing and configur
Page 98 and 99: 98 Setting up I/O fencingAbout I/O
Page 100 and 101: 100 Setting up I/O fencingPreparing
Page 102 and 103: 102 Setting up I/O fencingPreparing
Page 104 and 105: 104 Setting up I/O fencingSetting u
Page 110 and 111: 110 Setting up I/O fencingAdditiona
Page 116 and 117: 116 Setting up I/O fencingHow I/O f
Page 118 and 119: 118 Setting up I/O fencingHow I/O f
Page 120 and 121: 120 Setting up I/O fencingAbout the
Page 122 and 123: 122 Setting up I/O fencingTroublesh
Page 130 and 131: 130 Verifying the VCS installationV
Page 142 and 143: 142 Verifying the VCS installationA
Page 144 and 145: 144 Upgrading to VCS 5.0Upgrading V
Page 152 and 153: 152 Upgrading to VCS 5.0Upgrading t
Page 154 and 155: 154 Upgrading to VCS 5.0
Page 156 and 157: 156 Adding and removing cluster nod
Page 166 and 167: 166 Installing VCS on a single node
Page 176 and 177:
176 Installing VCS on a single node
Page 178 and 179:
178 Advanced topics related to inst
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
194 Configuring the Symantec Licens
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
200 IndexDdata disksfor I/O fencing
Page 202 and 203:
202 IndexrequirementsEthernet contr
Page 204:
204 Index
show all

Cluster Server Installation Guide for Solaris x64 5.0 - Storage ...

Create successful ePaper yourself

Delete template?

Save as template?