750-339, Firewire Fieldbus Coupler - MarInfo

750-339Firewire Fieldbus Coupler100/200/400 Mbaud; digital and analog signalsIEEE 1394socketIEEE 1394socket750- 339IEEE 1394PHYISOASYNI/O01 02 03 04AB01 0224V 0V+ +— —CDStatusvoltage supply-System-Power jumper contactsData contactsSupply24 V0 VSupply viapower jumper contacts24 V0 VIEEE 1394socketPEPEConfigurationinterfacePower jumper contactsThis buscoupler allows connection of the WAGO-I/O-SYSTEM as a slave toFirewire or IEEE 1394 fieldbus.The buscoupler automatically configures, creating a local process imagewhich may include analog, digital or specialty modules. Analog andspecialty module data is sent via words and/or bytes, digital data is sent bitby bit.The local process image is divided into two data zones containing the datareceived and the data to be sent and is displayed in the IEEE 1394 addressarea of the bus coupler. The process data can be sent via the Firewire fieldbusto the PLC, PC or NC for further processing, and received from the field viaFirewire.Pack.DescriptionItem no.unitFirewire 750-339 1The data of the analog modules is stored in the process image which iscreated automatically according to the order in which the modules areconnected to the bus coupler. The bits of the digital modules are sent byteby byte and added to the analog data. If the amount of digital informationexceeds 8 bits, the buscoupler automatically starts with a new byte.System dataNo. of couplers connected to Master 63Transmission mediumshielded Cu cable in accordance withIEEE 1394; 2 x 2 x 28 AWG+ 2 x 22 AWGMax. length of bus line72 m/bus segment (17 nodes)4.5 m between two nodesTopologytreeBaud rate100 Mbaud, 200 Mbaud, 400 MbaudBuscoupler connection3 x 6-pole IEEE 1394 socketPack.AccessoriesItem no.unitMiniature WSB Quick marking systemplain 248-501 5with marking see pages 214 ... 215Approvalsr UL 508Conformity marking 1Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 •D-32385 Minden Tel.: +49(0)571/887-0 E-Mail: info@wago.com25.04.2007 Hansastr. 27 •D-32423 Minden Fax: +49(0)571/887-169 www.wago.com

FIELDBUSINTERFACE1524 V /0 V24 V10 nF24 V5 VBusmodulesELECTRONICS0 VELECTRONICS23467824 V0 V24 V0 V10 nFFIELDBUSINTERFACE3 x1) 1 MΩ1) 2)2) 10 nF /500 V750-339Technical DataMax. no. of I/O modules 64with bus extension 255FieldbusMax. input process image2040 bytesMax. output process image2040 bytesConfigurationvia PC or PLCOther characteristicsdata exchange via asynchronous packetsVoltage supply DC 24 V (-15 % ... +20 %)Max. input current (24V)500 mAEfficiency of the power supply 87 %Internal current consumption (5V) 380 mATotal current for I/O modules (5V) 1620 mAIsolation500 V system / supplyVoltage via power jumper contacts DC 24 V (-15 % ... +20 %)Current via power jumper contacts (max.) DC 10 AGeneral SpecificationsOperating temperature 0 °C ... +55 °CWire connection CAGE CLAMP ®Cross sections 0.08 mm² ... 2.5 mm² / AWG 28 ... 14Stripped lengths8 ... 9 mm / 0.33 inDimensions (mm) W x H x L 62 x 65 x 100Height from upper edge of DIN 35 railWeightapprox. 218 gStorage temperature -25 °C ... +85 °CRelative humidity (without condensation) 95 %Vibration resistance acc. to IEC 60068-2-6Shock resistance acc. to IEC 60068-2-27Degree of protection IP 20EMC 1-Immunity to interference acc. to EN 61000-6-2 (1999)EMC 1-Emission of interference acc. to EN 61000-6-4 (1997)