Product Owner's Manual - Precor

TIME ELAPSED and TIME REMAININGTIME ELAPSED—displays time in minutes and seconds andindicates the amount of time you have been exercising.When you exceed 60 minutes during a single session, thedisplay converts to hours and minutes.Note: The fitness facility can place limits on workout time.TIME REMAINING—shows the amount of time remaining ina workout. If the selected time is less than 60 minutes, thedisplay shows time in minutes and seconds. If you select atime greater than 60 minutes, the display reflects hours andminutes until the countdown reaches 60 minutes, at whichtime the display reverts to minutes and seconds.Note: If you select a NO LIMIT time goal, the TIMEREMAINING display appears blank. Press the left selectionkey if you wish to display elapsed time.INCLINEINCLINE—displays the percentage of incline or declineduring your workout. The INCLINE keys affect the lift and letyou set an incline between 0% and 15% (956i/946i) and aminus 3% to 15% (966i). The values displayed can changein 0.5% increments.SPEEDSPEED—displays the running belt speed in miles per hour(mph) or kilometers per hour (kph). The running belt speedranges between 0.5 and 16 mph (0.8 to 25 .5 kph) on the 956iand 966i treadmills. The 946i has a range of 0.5 to 12 mph(0.8 to 20 kph). The speed can be changed in 0.1increments using the SPEED keys.Note: You can press the SPEED down key to stop therunning belt. When 0 appears in the SPEED display, therunning belt stops.DISTANCE, PACE, and AVERAGE SPEEDDISTANCE—shows linear distance in either miles orkilometers. The distance is calculated based on your speed.PACE—displays your target speed in minutes and secondsper mile (or kilometer). For example, the number 4:23indicates that your pace (speed at which you are moving) is4 minutes and 23 seconds per mile.AVERAGE SPEED—indicates the average speed associatedwith your workout.User's Reference Manual: Display Console 19