Product Owner's Manual - Precor

Recumbent Bike: Realigning the SeatIf the seat rocks side-to-side, you need to realign the center wheelunderneath the seat. Adjustment screws are located on the leftside of the seat rail.To remove seat wobble (side-to-side movement), take the followingsteps.3. Use the ⁵⁄₁₆-inch hex key to turn the wheel lock adjustment keyclockwise ¼ turn as shown in the following figure. This processrealigns the center wheel inside the top rail. Leave the ⁵⁄₁₆-inchhex key in place while you tighten the adjustment screws withthe ³⁄₁₆-inch hex key.1. Obtain a ³⁄₁₆-inch and ⁵⁄₁₆-inch hex key.2. Use the ³⁄₁₆-inch hex key to loosen the two adjustment screwsas shown in the following figure.Figure 9: Realigning the center wheel4. Remove the hex keys and check that the seat no longer rocksside-to-side. If the rocking movement continues, you need torepeat steps 2 and 3.Figure 8: Loosening the two adjustment screwsProduct Owner's Manual: Maintenance 38