Product Owner's Manual - Precor

Treadmill: Adjusting the Running BeltIf you are unsure about adjusting the running belt, call PrecorCustomer Support (refer to Obtaining Service).CAUTION: For your safety, use the power switch to turn Off thetreadmill before making any adjustments. Do not adjust therunning belt when someone is standing on the equipment.1. Locate the right belt adjustment bolt in the rear end cap of thetreadmill as shown in the following figure.To determine left and right, stand at the rear of the treadmill andface the display. Make all belt adjustments on the right rearcorner bolt using the hex key provided.• If the belt is off center to the LEFT, turn the adjusting bolt ¼turn counterclockwise, which moves the running belt to theright.• If the belt tracks off center to the RIGHT, turn the bolt ¼turn clockwise; this moves the belt to the left.Important: Do not turn the adjusting bolt more than ¼ turn at atime. Overtightening the bolt can damage the treadmill.2. Recheck the alignment of the running belt by repeating thesteps found in Treadmill: Checking the Alignment of theRunning Belt.Figure 5: Location of the adjustment boltProduct Owner's Manual: Maintenance 36