Product Owner's Manual - Precor

EFX: Cleaning the RampWhenever the ramp becomes soiled, clean the exposed surfacesof the ramp and roller wheels by taking the following steps.Note: If your equipment has a ramp cover, remove it beforeperforming the following steps. Refer to the EFX Assembly Guide.1. Moisten a clean, soft cloth in a mild solution of soap and water.2. Position one foot pedal at the top of the ramp (the other willautomatically be positioned at the bottom).3. Clean the exposed portions of the ramp.4. Gently lift the roller wheels. Rotate each wheel while wiping itwith the clean, soft cloth.5. Switch the foot pedal position and finish cleaning the ramp.Storing the Chest StrapIf you purchased the optional heart rate chest strap, store it in aplace where it remains free of dust and dirt (for example, in a closetor drawer). Be sure to protect the chest strap from extremes intemperature. Do not store it in a place that may be exposed totemperatures below 32° F (0° C).To clean the chest strap, use a sponge or soft cloth dampened inmild soap and water. Dry the surface thoroughly with a clean towel.WARNING Signals used by the Chest Strap Transmitter(or heart rate strap) may interfere withpacemakers or other implanted devices.Consult your physician and the manufacturersof your Chest Strap Transmitter andimplanted device before using a Chest StrapTransmitter.Note: To receive an accurate reading, the strap needs to be indirect contact with the skin on the lower sternum (just below thebust line for women).Product Owner's Manual: Maintenance 34