Product Owner's Manual - Precor

3. To change the height of the column, refer to the following table.Table 5. Custom Program keysEquipment KeyDescriptionTreadmill INCLINE keys Changes the column height andaffects the Custom Program incline.EFX CROSSRAMPkeysChanges the column height andaffects the Custom Program rampincline.CycleClimberRESISTANCEkeysRESISTANCEkeysChanges the column height andaffects the Custom Program pedalresistance.Changes the height of the columnand affects the Custom Programstep resistance.Informational DisplaysUse the information displays to locate information about equipmentuse (odometer and hour meter), software versions and partnumbers, serial number, usage log, and error log. In general, youwould only access this information if directed to do so by PrecorCustomer Support.To navigate through the informational displays, use the followingflowchart. A table located after the flowchart provides moreinformation about each more display.4. When the column height is set, press the down arrow key onthe navigational keypad, to move to the next column. You canpress the up arrow key to move back and change earliercolumns as needed.5. Continue adjusting the profile for each column.6. When you are ready, press OK to save the program profile andreturn to the Precor banner.Note: If you prefer to exit the program without saving changesto the custom profile, press BACK.Product Owner's Manual: Club Features 29