Product Owner's Manual - Precor

Treadmill: Setting an Incline LimitYou can set the maximum grade (percent of incline) for thetreadmill. This limits the degree of incline and, consequently, thenumber of incline settings that are available to the user. Theavailable range is:Treadmill Percent of InclineC956i 0 to 15% gradeC966i -3 to 15% grade1. At the SET INCLINE LIMIT prompt, press OK. Use thenavigational arrow keys to select the desired grade.2. When you are ready, press OK to accept the displayed settingand move to the next program. For other options, refer tothe table in Accessing Club Programming Mode and Changingthe Settings.Treadmill: Accessing PerformanceProgramsNote: This feature is not available on the 946i treadmill.Several performance-based programs on the treadmill can behidden from the user’s view and, consequently, be unavailableduring an exercise session. These programs are shown in thefollowing list:If you keep the default factory setting, the Track and 5K programsare available to the user through the PERFORMANCE key.If you wish to change this setting, perform the following steps:1. Press OK to review the current HIDDEN PROGRAMSselection. Use the navigational arrow keys to alternate betweenthe two selections.Setting DescriptionSHOW Causes all the Performance Programs listedPROGRAMS above to appear. The user can access eachprogram through the PERFORMANCE key on thedisplay.HIDEPROGRAMSHides the Performance Programs listed aboveand makes them inaccessible to the user.However, the Track and 5K programs remainavailable and are accessed when a user pressesthe PERFORMANCE key.2. When you are ready, press OK to accept the displayed settingand move to the next program. For other options, refer tothe table in Accessing Club Programming Mode and Changingthe Settings.Gerkin Fitness Test, USAF PRT, NAVY PRT, ARMY PFT, USMCPFT, Federal Law Enf. PEB.Product Owner's Manual: Club Features 26