Product Owner's Manual - Precor

Use the following flowchart to navigate through the menu settingson climbers.Treadmill: Selecting Safety CodeProtectionWhen the equipment is shipped from the factory, the safety codeprotection feature is disabled. If you enable the safety code, yourpatrons will need to enter four number keys in sequence to begintheir exercise session and, on the treadmill, start the running belt. Ifthe correct keys are not pressed within two minutes, further accessis denied. For more information, refer to Entering the Safety Code.1. At the SAFETY CODE prompt, press OK. Use the navigationalarrow keys to alternate between the two selections.Setting DescriptionENABLEDDISABLEDCauses the safety code prompt to appear prior to aworkout and when returning from pause mode.Does not require a safety code to operate.CAUTION: Do not assume the equipment is safe because ofsafety code protection. Never leave children unsupervisedaround the equipment.2. When you are ready, press OK to accept the displayed settingand move to the next feature. For further options, refer tothe table in Accessing Club Programming Mode and Changingthe Settings.Product Owner's Manual: Club Features 22