Product Owner's Manual - Precor

Club FeaturesThis section is designed to show you how to customize theequipment for your users and view useful product information. Allthese features remain hidden to the users and can only beaccessed using special keypresses. These custom settings allowyou to• Enable or disable the safety code (treadmill)• Change the display to a different language• Change the display to show U.S. standard or metricmeasurements• Set the maximum exercise and pause times• Set a cool down time limit• Set the maximum speed and incline (treadmill)• Enable or disable hidden programs or remote access (treadmill)• Change the auto-level setting (EFX)• Set the resistance range (bike)• Customize a program• View the odometer• Display the number of hours the equipment has been in use• View the software versions and part numbers• Display the serial number• Check the program usage and error logsNote: To review the product programming prompts and factorydefault settings that can be changed through productprogramming mode, refer to the following table.Club Programming Tips• Always start at the Precor banner.• Electrical power must be supplied. For self-powered equipment,a constant power source is available if you use the optionalpower adapter. Otherwise, users have to maintain the minimumrate of motion. If you plan to program self-powered equipment,purchasing the optional power adapter is highly recommended.Note: If you do not use the optional power adapter duringprogramming mode, and the rate of motion falls below theminimum requirements, no warning is given when the equipmentmoves into its 30-second shutdown procedure.• The club programming mode is accessed by pressing theRESET key at the Precor banner. The remaining key pressesmust occur quickly and without pause.Note: Treadmill keys that can be used interchangeably in clubprogramming mode are: PAUSE/RESET and the red STOPbutton. On the EFX, the CLEAR and ENTER keys performspecific functions, but the number keypad is disabled once youenter club programming mode.• Changes made in the programming mode become the defaultsettings when the display resets to the Precor banner.Product Owner's Manual: Club Features 17