Product Owner's Manual - Precor

Self-Powered FeaturesOn self-powered equipment, the battery initializes and displays thePrecor banner when a user starts exercising. A minimum rate ofmotion must be maintained for the banner to appear, as shown inthe following table. When a person meets the requirements, thepower that is generated allows the equipment to function properly.Table 1. Minimum requirements for operationEquipment Rate of MotionAMTEFXClimberCycle56 strides per minute (SPM)40 strides per minute (SPM)30 steps per minute20 revolutions per minute (RPM)Informational displays appear when the battery is low or when therate of motion drops below the minimum requirements. The displayexplains what to do to retain power. If the messages are ignored,the equipment begins shutdown procedures to maintain the chargeof the battery. Refer to Informational Displays Prior to Shutdown.Informational Displays Prior toShutdownThe equipment saves its battery charge by moving into a shutdownmode. If the user does not maintain the minimum rate of motion, a30-second shutdown process begins.Dots appear in the display and all key presses are ignored. If nomovement is detected or the rate of motion remains below theminimum, the dots steadily disappear as the countdown continues.Note: The user can resume exercising if he or she begins beforethe countdown period elapses.Important: If the equipment is connected to a CSAFE masterdevice, a slightly different scenario occurs. When ten secondsremain before the equipment shuts off, the exercise session ends.RESETTING appears in the display while the equipmentdisconnects from the CSAFE master device. All key presses areignored.An optional power adapter can be purchased and providessustained power to the equipment. If you plan to change theprogram settings, the power adapter is highly recommended.To purchase the optional power adapter, check with your dealer.Product Owner's Manual: Self-Powered Features 13