Product Owner's Manual - Precor

Thank you for choosing Precor. For proper installation, please read this guidethoroughly and follow the assembly instructions. If you do not assemble thetreadmill according to these guidelines, you could void the Precor LimitedWarranty.Obtaining ServiceYou should not attempt to service the treadmill except for maintenance tasksas described in the Product Owner’s Manual. If any items are missing,contact your dealer. Should you need more information regarding customersupport numbers or a list of Precor authorized service centers, visit thePrecor web site at www.precor.com/corp/contact.Unpacking the EquipmentThe unit is shipped in two boxes. Ask for help from two or more people tounpack and assemble the treadmill.Required Tools• Crescent wrench• Wire tie cutterInstallation RequirementsFollow these installation requirements when assembling the unit:• Assemble the unit near the location where you plan to use it.• Provide ample space around the unit.The minimum space requirement needed for user safety and propermaintenance is three feet wide by six feet deep (one meter wide by twometers deep), directly behind the running belt.• Set up the unit on a solid, flat surface.A smooth, flat surface under the unit helps keep it level. A level unit hasfewer malfunctions.• Open the box and assemble the components in the sequencepresented in this guide.• Insert all fasteners with your fingers.Use your fingers to properly align and thread the fasteners. This helpsalleviate cross-threading. Do not fully wrench tighten fasteners untilinstructed to do so.Important: When wrench tightening, the head of the fastener should beflush with the product. If it is not, cross-threading has occurred. Do notattempt to rework the assembly as more damage to the equipment willoccur. Contact Customer Support. Refer to Obtaining Service.Cardio Theater PVSAssembly InstructionsIf the Cardio Theater Personal Viewing System (PVS) accompanies this Precorunit, review the PVS assembly instructions found in the Cardio Theater box.Alleviate additional assembly or disassembly steps by combining the twoassemblies as needed.946i/932i Commercial Treadmill Assembly Guide 1