Dinion IP - NWC-0495 - Bosch

EN | viiiDinion IP | Installation Manual12. Unplug this equipment during lightning storms or when unused for longperiods of time.13. Refer all servicing to qualified service personnel. Servicing is required whenthe equipment has been damaged in any way, such as when power supplycord or plug is damaged, liquid has been spilled or objects have fallen intothe equipment, the equipment has been exposed to rain or moisture, does notoperate normally, or has been dropped.14. An all-pole mains switch with a contact separation of at least 3mm in eachpole shall be incorporated in the electrical installation of the building.WarningTo reduce the risk of electric shock, do not remove covers. No userserviceableparts inside. Refer servicing to qualified service personnel.WarningTo reduce the risk of fire or electric shock, this apparatus should not beexposed to rain or moisture and objects filled with liquids, such as vases,should not be placed on this apparatus.FCC InformationThis equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.Bosch Security Systems | 2006-05 | V2.0