Dinion IP - NWC-0495 - Bosch

Dinion IP | Installation ManualEN | 85Connections between video servers 7A camera can be used as a transmitter and a compatible MPEG-4 hardwaredecoder with a connected monitor as a receiver using an Ethernet networkconnection. This way it is possible to cover large distances with little effort forinstallation or cabling.InstallationCameras are designed to connect with other VIP devices automatically with thecorresponding configuration. This only requires that they be part of a closednetwork. Proceed as follows to install the devices:– Connect the devices to the closed network using Ethernet cables.– Connect them to the mains supply.NoteMake sure the devices are configured for the network environment and thecorrect IP address for the remote location to be contacted in the event ofan alarm is set on the Alarm connections configuration page.Establishing the connectionThere are three options for establishing a connection between a transmitter and acompatible receiver in a closed network:• an alarm,• a Web browserConnect on alarmWith the appropriate configuration, a connection between a transmitter and areceiver is established automatically when an alarm is triggered. After a shorttime, the live video image from the transmitter is shown on the connectedmonitor.Bosch Security Systems | 2006-05 | V2.0