Dinion IP - NWC-0495 - Bosch

Dinion IP | Installation ManualEN | 79Multicast address video 1Enter a valid multicast address for each stream to be operated in multicast mode(duplication of the data streams in the network). With the setting 0.0.0.0 theencoder for the relevant stream operates in multi-unicast mode (copying of datastreams in unit). The camera supports multi-unicast connections for up to fivesimultaneously connected receivers.PortNoteDuplication of data places a heavy demand on the CPU and can lead toimpairment of the image quality under certain circumstances.If there are simultaneous data streams at the same multicast address, you mustassign different ports to each data stream. Enter the port address for the relevantstream here.StreamingClick in the check box to activate multicast streaming mode for the relevantstream. An activated stream is marked with a check.Multicast packet TTLA value can be entered to specify how long the multicast data packets are activeon the network. If multicast is to be run via a router the value must be greaterthan 1.Version informationThe hardware and firmware version numbers are for information only andcannot be altered. Keep a record of these numbers in case technical assistance isrequired.Hardware versionThe hardware version number of the camera is displayed.Bosch Security Systems | 2006-05 | V2.0