Dinion IP - NWC-0495 - Bosch

More documents

Recommendations

Info

Dinion IP | Installation ManualEN | 73Scene too noisyActivate this function if tampering associated with EMC interference (noisy sceneas the result of a strong interference signal in the vicinity of the video lines), as anexample, should trigger an alarm.Reference checkYou can save a reference image that is continuously compared with the currentvideo image. If the current video image in the marked areas differs from thereference image, an alarm is triggered. This allows you to detect tampering thatwould otherwise not be detected, for example if the camera is turned.• Click Reference to save the currently visible video image as a reference.• Click Select area and select the areas in the reference image that are to bemonitored.• Check the box Reference check to activate the on-going check. The storedreference image is displayed in black and white below the current videoimage, and the selected areas are marked in red.Selecting the areaYou can select the image areas in the reference image that are to be monitored.The video image is subdivided into 858 square fields. You can activate ordeactivate each of these fields individually.NoteSelect only those areas for reference monitoring in which no movementtakes place and that are always evenly lit, as false alarms could otherwisebe triggered.• Click Select area to configure the sensor fields. A new window will open.• If necessary, click Clear all first to clear the current selection (fields markedred).• Left-click the fields to be activated. Activated fields are marked red.• If necessary, click Select all to select the entire video frame for monitoring.• Right-click any fields you wish to deactivate.• Click OK to save the configuration.Bosch Security Systems | 2006-05 | V2.0
EN | 74Dinion IP | Installation Manual• Click the close button (X) in the window title bar to close the window withoutsaving the changes.Alarm e-mailAs an alternative to automatic connecting, alarm states can also be documentedby e-mail. In this way it is possible to notify a recipient who does not have avideo receiver. In this case the NWC-0495 automatically sends an e-mail to apreviously defined e-mail address.Send alarm e-mailSelect On if you want the unit to automatically send an alarm e-mail in the eventof an alarm.Mail server IP addressEnter the IP address of a mail server that operates on the SMTP standard (SimpleMail Transfer Protocol). Outgoing e-mails are sent to the mail server via theaddress you entered. Otherwise leave the box blank (0.0.0.0).LayoutYou can select the data format of the alarm message.• Standard (with JPEG): e-mail with JPEG image file attachment.• SMS: e-mail in SMS format to an e-mail-to-SMS gateway (for example to sendan alarm by cellphone) without an image attachment.Bosch Security Systems | 2006-05 | V2.0
Page 1 and 2:
Dinion IP - NWC-0495ENInstallation
Page 3 and 4:
Dinion IP | Installation ManualEN |
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
EN | viiiDinion IP | Installation M
Page 11 and 12:
EN | xDinion IP | Installation Manu
Page 13 and 14:
Page 15 and 16:
EN | 14Dinion IP | Installation Man
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24: EN | 22Dinion IP | Installation Man
Page 41: EN | 40Dinion IP | Installation Man
Page 73: EN | 72Dinion IP | Installation Man
Page 99: Bosch Sicherheitssysteme GmbHLudwig
show all

Dinion IP - NWC-0495 - Bosch

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?