Dinion IP - NWC-0495 - Bosch

EN | 70Dinion IP | Installation ManualNoteOn the Livepage configuration page, you can enable additionalinformation overlays for the live video image too (see page 88).Analysis typeSelect the required analysis algorithm. By default, only MOTION+ is available –this offers a motion detector and essential recognition of tampering. The currentalarm status is displayed for information purposes.NoteAdditional analysis algorithms with comprehensive functions such asIVMD are available from Bosch Security Systems.Motion detectorFor the detector to function, the following conditions must be met:• Analysis must be activated.• At least one sensor field must be activated.• The individual parameters must be configured to suit the operatingenvironment and the desired responses.• The sensitivity must be set to a value greater than zero.CautionReflections of light (off glass surfaces, etc.), switching lights on or off orchanges in the light level caused by cloud movement on a sunny day cantrigger unintended responses from the motion detector and generate falsealarms. Run a series of tests at different times of the day and night to ensurethat the video sensor is operating as intended.For indoor surveillance, ensure constant lighting of the areas during theday and at night.SensitivityThe basic sensitivity of the motion detector can be adjusted for theenvironmental conditions to which the camera is subject.The sensor reacts to variations in the brightness of the video image. The darkerthe observation area, the higher the value that must be selected.Bosch Security Systems | 2006-05 | V2.0