Dinion IP - NWC-0495 - Bosch

Dinion IP | Installation ManualEN | 65Video inputThe number of the video input is displayed for information purposes.• Select the required data stream from the list field.Type of recordingSelect the required recording type.In the case of Ring mode the recording proceeds continuously. If the maximumhard drive space has been reached, the oldest recordings are automaticallyoverwritten.In the case of Linear mode the recording proceeds until the entire hard drivespace is full. The recording is then stopped until old recordings have beendeleted.Recording profileSelect the profile that is to be active during recording. You can view and modifythe parameters for the profile (see MPEG-4 encoder, from page 43).NoteThe recording profile can deviate from the standard setting Active profilefor the video input set and is only used during an active recording.Number of alarm tracksSelect the number of alarm tracks to be used in the partition. One alarm eventcan be recorded in each alarm track. Accordingly, the number of alarms enteredcan be recorded and archived. A partition can contain a maximum of 128 alarmrecordings.If the option Ring mode (see page 65) is set for a partition, the latest alarmrecordings are always saved in the preset number. If the option Linear mode isselected, the recording is stopped as soon as the total number of alarm tracks hasbeen recorded.Already Used alarm tracks are displayed in the graphic next to the parameter.Alarm recordingSelect which time intervals are to be covered for Pre-alarm and Post-alarm.Bosch Security Systems | 2006-05 | V2.0