Dinion IP - NWC-0495 - Bosch

Dinion IP - NWC-0495 - Bosch Dinion IP - NWC-0495 - Bosch

bosch.securitysystems.cz
from bosch.securitysystems.cz More from this publisher
13.07.2015 Views

Dinion IP | Installation ManualEN | 51Blue GainATW mode and AWB hold mode: adjusts the B gain to optimize around thewhite point.SaturationAdjusts the color saturation. -15 will lead to a monochrome imageBack Light Compensation (BLC)When ON, the video level is optimized for the selected area of the image. Partsoutside this area may be underexposed or overexposed (this is normal). To set-upan area for BLC, click Area Selection.Selecting an areaBosch Security Systems | 2006-05 | V2.0

EN | 52Dinion IP | Installation ManualWhen you click Area Selection a pop-up window appears with a still picture ofthe received video. Use your mouse to select an area in the picture. BLC Leveladjusts the balance between the selected BLC area and its surrounding.Installer OptionsSelect the synchronization method for the camera: Internal for free runningcamera operation; Line Lock to lock to the power supply frequency.You can disable the buttons on the camera to prevent unauthorized change of thecamera settings. You can also disable the LED at the rear of the camera to avoidit interfering with the image sensing of the camera.Click the Restore all defaults button to restore the factory defaults. Aconfirmation screen appears. Allow 5 seconds for the camera to optimize thepicture after a mode reset.RecordingYou can record the images from the camera in the RAM memory of the unit orin an appropriately configured iSCSI storage device.Local RAM memory is suitable for short-term recordings and pre-alarmrecordings in Ring mode operation.Bosch Security Systems | 2006-05 | V2.0

EN | 52<strong>Dinion</strong> <strong>IP</strong> | Installation ManualWhen you click Area Selection a pop-up window appears with a still picture ofthe received video. Use your mouse to select an area in the picture. BLC Leveladjusts the balance between the selected BLC area and its surrounding.Installer OptionsSelect the synchronization method for the camera: Internal for free runningcamera operation; Line Lock to lock to the power supply frequency.You can disable the buttons on the camera to prevent unauthorized change of thecamera settings. You can also disable the LED at the rear of the camera to avoidit interfering with the image sensing of the camera.Click the Restore all defaults button to restore the factory defaults. Aconfirmation screen appears. Allow 5 seconds for the camera to optimize thepicture after a mode reset.RecordingYou can record the images from the camera in the RAM memory of the unit orin an appropriately configured iSCSI storage device.Local RAM memory is suitable for short-term recordings and pre-alarmrecordings in Ring mode operation.<strong>Bosch</strong> Security Systems | 2006-05 | V2.0

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!