Dinion IP - NWC-0495 - Bosch

Dinion IP | Installation ManualEN | 39Time stampingThis field sets the position of the time and date overlay. It can be displayed at theTop, at the Bottom or at a position of your choice, which you have pre-definedusing HyperTerminal, using the Custom option. Or it can be set to Off if nooverlay of this information is to be shown.Alarm mode stampingChoose On if a text message should be overlaid in the event of an alarm. It canbe displayed at a position of your choice using the Custom option. Or it can beset to Off if no overlay of this information is to be shown.– Select the desired position from the lists.– If you have selected the Custom option, additional fields are displayed tospecify the exact position (Position (XY):).– In the Position (XY): fields enter the values for the desired position.Displayed alarm messageEnter the message to be displayed for an alarm. It can contain up to31 characters.Video watermarkingChoose On if the video images transmitted are to be watermarked. Afteractivation, all images are marked with a small green rectangle. A red rectangleindicates that the sequence (live or saved) has been manipulated.Encoder SettingsFor encoding the video signal, you can select two profiles and change the presetsfor the profiles.Bosch Security Systems | 2006-05 | V2.0