Dinion IP - NWC-0495 - Bosch

EN | 38Dinion IP | Installation ManualTime serverThe camera can receive the time signal from a time server using the time serverprotocol (RFC 868) and then use it to set the internal clock. The device calls upthe time signal automatically every ten minutes.Time zoneSelect the time zone in which the system is located.Time settingsSelect this during daylight savings time if the time change is to be taken intoaccount. Deactivate the check box to switch to winter time.Time server IP addressEnter the IP address of a time server working with the RFC 868 protocol.Display stampingVarious overlays or stamps in the video image provide important supplementaryinformation. These overlays can be enabled individually and arranged on theimage in a clear manner.Camera name stampingThis field sets the position of the camera name overlay. It can be displayed at theTop, at the Bottom or at a position of your choice using the Custom option. Or itcan be set to Off if no overlay of this information is to be shown.Bosch Security Systems | 2006-05 | V2.0